Whether it is mahogany furniture or solid wood furniture, it is very important to do its maintenance work. The following explains the maintenance techniques of wooden furniture to everyone, and everyone at home may wish to give appropriate reference.
Experienced consumers know that the maintenance of wooden furniture should be regular. The air humidity in spring, autumn, and winter is relatively low, and the room is relatively dry; in summer, the air is rich in water, and indoor walls and floors are prone to flooding. Therefore, we must pay attention to wooden furniture at all times and maintain it carefully.
The surface of wooden furniture is painted with lacquer, and the maintenance and repair of its paint film is the first element. The types of paints used in today's wood furniture finishing are generally nitro paint, matt paint, unsaturated polyester paint, paint, and high-grade polyurethane paint and acrylic paint. No matter what kind of lacquered wooden furniture, maintenance and maintenance should master these points:
Daily maintenance
The wooden furniture should be kept clean frequently, and the dust on the surface should be gently wiped off with a soft dry cotton cloth every day. Every once in a while, according to the specific situation, use the wet cotton thread wringed out the water to wipe off the dust accumulated at the corner of the wooden furniture. . It can also be coated with a thin layer of high-quality varnish after wiping, to wipe the gloss gently like leather. This not only maintains the wooden furniture, but also increases its brightness. However, you must be cautious when choosing light wax. Never use some inferior products that contain chemically corrosive ingredients to avoid blistering or cracking of the paint film, or even the loss of fine parts.
How to remove stains
If there is any stain on the surface of the wooden furniture, don't wipe it hard. Warm tea water can be used to gently remove the stain. After the water evaporates, apply a little light wax to the original part, and then gently rub it several times to form a protective film. Note: Never use alcohol, gasoline or other corrosive chemical solvents to avoid damage to the paint film.
Avoid scratching hard objects
When cleaning, do not let the cleaning tools touch the wooden furniture. Usually also pay attention to, do not let hard metal products or other sharp objects collide with wooden furniture to protect the surface from scratches. Notice: Once the film layer of paint decoration, especially polyurethane paint is damaged, it can hardly be repaired.
Avoid humid environment
In summer, if the room is flooded, it is better to use thin rubber pads to separate the wooden furniture from the ground contacting parts, and to keep the wall of the wooden furniture between the wall and the wall by 0.5 to 1 cm.
Keep away from heat
In winter, it is best to place wooden furniture at a distance of about 1 meter from the heating source to avoid long-term high-temperature baking, resulting in local dry cracking, warpage and local qualitative changes in the paint film.
Avoid direct sunlight
Try to avoid the long-term exposure of outdoor sunlight to the whole or part of the wooden furniture as far as possible. It is best to place it in a place where it can avoid the sunlight, or use a translucent tulle curtain to separate the direct sunlight. In this way, it does not affect the indoor lighting, but also makes the soft light add a warm and romantic atmosphere to the living room, while protecting the indoor furniture. (Editor: Peter)
Shutters are a style of Windows that originated in China. In ancient Chinese architecture, there were 
, which were used in all dynasties from the warring states period to the han dynasty. The vertical bar is called the mullion window, and there is a horizontal one, called the mullion window. The mullion window is a kind of original pattern of shutters, also can say it is the state of the shutter originally.
The leaves of the shutters are an important part of the shutters. When buying a shutter, it is best to first touch the blinds to see if the blades are smooth and uniform, and see if each blade will be trimmed. In general, the quality of the shutter in the details of the blade has good processing, especially in plastic, wood, bamboo production shutter blades, if the quality is better, so it will be a long service life.
The regulating rod is also a key part of the shutter. The control rod of shutters has two functions, one is to adjust the lifting switch of the shutter, the other is to adjust the Angle of the blade. When inspecting the adjusting lever, the shutters should be hung to test to see whether the lifting switch is smooth, and then turn the adjustment rod to see whether the blade's turnover is equally flexible.
Centrifugal Fan,AC Fan,DC Fan,Cross Flow Fan,Radiator Fan,Pipe Fan
Shenzhen Fusheng Motor Co.,Ltd , http://www.fushengfan.com