Where is the reason why the car ABS light is on?

Posted on

[ Pacific Security Network News ]
Private cars are becoming more and more popular, and some car owners sometimes find that the car ABS lights are on. The main point of this article is to explain the contents of the car ABS lights:
The reason why the car ABS light is on
A 4S shop staff member said that there are two main problems with ABS lights. One is the problem of the ABS sensor, the sensor probe is dirty, the wiring harness insulation is broken, etc. The second is the problem of the ABS pump, which has four solenoid valves, which may be one of them.
There may also be the following reasons:
1. One or more problems with the speed sensor installed on the four-wheel side----the common reason is to replace the brake disc or the sheet and the puddle to cause the sensor to malfunction.
2. The brake fluid level sensor is faulty----the common cause is brake fluid leakage or excessive wear of the brake pads. When the liquid level is lowered, the ABS system stops working to prevent air from entering the master pump.
3, the battery voltage is too low (generally less than 11 volts)
4, the wheel pressure is too low, or a certain tire slips more than a certain time
5, the plug line is loose.
Solution: Remove the rear seat, wrap the plug with black tape, and then fix it with the transparent tape to ensure that it is not loose.

Sodium Hyaluronate is very important for skin because it improves moisturization, maintains skin resilience, and reduces damage in the lower part of skin when the skin is damaged. It also acts like lubricant by causing collagen, a main constituent of skin, to move smoothly in between cells.


But from the age of 25, Sodium Hyaluronate in human body will lose gradually, only remaining 65% of young skin at the age of 30, only 25% of young skin at the age of 50.


With the increase of the age and the loss of Sodium Hyaluronate, the skin will lose elasticity and luster, aging, wrinkles and relaxation will be generated gradually.

Sodium HyaluronateHA powder CAS NO. 9004-90-1

Sodium Hyaluronate is so water-friendly and it has functions of the best moisturizing factor and prevents diseases such as skin infections by preventing the penetration of external substances such as bacteria.
Therefore, it is regarded as an ideal "natural moisturizer" factor and widely used in cosmetics that suitable for different skins, climates and environments.
High molecular Sodium Hyaluronate can be formed breathable film on the surface of the skin, help the skin to lock moisture, and to prevent the invasion of bacteria, dust and ultraviolet, so that to protect the skin from damage.
Low molecular Sodium Hyaluronate, which is designed for better skin penetration, can penetrate into the dermis quickly, dilated capillaries slightly, promote blood circulation and metabolism, and so it has function of eliminating wrinkles, increasing skin elasticity and preventing skin aging.

Sodium Hyaluronate

Sodium Hyaluronate,Ha Sodium Hyaluronate,Moisturizing Sodium Hyaluronate,Hyaluronic Sodium Hyaluronate

Shandong Tiancheng Chemical Co., Ltd. , https://www.akdchemical.nl