1.Installation place: Must be installed in the room from wind and rain intrusion 2.Ambient temperature:40°C about 3.Relative humidity:80% 4.Air quality: If the air contains acid, alkali and other corrosive or flammable Gases should not be transported by explosion-proof blowers to avoid danger 5. Dust protection: There should be a lot of dust, powder, or fiber and other places should be avoided. If it is necessary to use in such occasions, please install a filter and clean it regularly. The dust attached to the filter and the explosion-proof high-pressure fan. 6. Ventilation and heat dissipation: Please choose to use it in a well-ventilated place. Do not use it in a closed room or a closed box. 7. Placement space: For the convenience of maintenance or repair, please avoid Installation is too small place 8. Avoid vibration: Please install in a place without vibration; If the site vibration is unavoidable, anti-vibration measures must be installed to prevent the high-pressure blower from external vibration and damage.
The working principle of the explosion-proof high-pressure fan: Our fan impeller is directly mounted on the rotor of the motor and is completely non-contact compression. Because the motor bearings are mounted outside the compression chamber, maximum operating reliability of the machine is ensured even at maximum differential pressure. The gas is sucked by the suction port 1. When it enters the side channel 2, the rotating impeller 3 gives the gas a velocity in the direction of rotation, while the centrifugal force on the blade accelerates the gas outward and the pressure increases. As the rotation proceeds, the gas The kinetic energy increases so that the gas pressure along the side channel increases further. As the side channel narrows at the beginning of the exit, the gas is forced out of the vane and set through the outlet to silence the 4-row pump body.
Explosion-proof high-pressure fan with stable performance, high pressure, strong vacuum, good sealing, no leakage, no oil and gas, explosion-proof proof <motor motor>, safe and reliable, aluminum alloy casting; output air clean, high precision; small size 100% pollution-free.
AF is a fluorine-containing coating formulated from a special structure of fluorosilicone resin. It has good hydrophobic and oleophobic effect, and its wear resistance and smoothness are greatly improved compared with conventional fluorosilane. It is mainly used for surface anti-fingerprint treatment of various mobile phone glass cover, glass protector, electronic display, optical lens and metal substrate (the surface reaches the lotus leaf effect, waterproof anti-fouling and anti-fingerprint), especially in line with high aluminum silicon,Anti-fingerprint oil treatment of glass.
Appearance: colorless or light yellow transparent liquid Wear resistance: after rubbing back and forth 3000 times (loading 1kg, 0000# steel wool, contact area 10mmx10mm), water contact angle is greater than 105°
Anti Fingerprint Coating,Anti Fingerprint Solution,Anti Fingerprint Coating Spray,Wear Resistant Coatings
Guangdong Giant Fluorine Energy Saving Technology Co.,Ltd , https://www.tuwtech.com