1. The sealing pipe installed in the cabinet is not tightly sealed or the ground is always in a damp state, causing the wooden material of the floor-standing wall cabinet to absorb moisture.
2. During construction, wet work is used on the wall and floor. The wall and floor are not dry and the cabinets and wall cabinets are installed. The moisture emitted from the wall and the ground is absorbed by the wood decoration materials.
3. The decoration material itself has a high moisture content.
4. The moisture of the wood material against the wall cannot be dissipated.
5. The wooden material against the wall is not treated with anti-corrosion treatment.
Preventive measures
1. Before installing the cabinets and wall cabinets, preservatives should be applied to the wood materials near the wall, against the wall and in the moisture-proof parts.
2. Since the cabinets and wall cabinets are installed on the wall, the moisture of the wooden materials is not easy to be dissipated after the moisture absorption. Therefore, the surface of the wooden materials such as the splints in the cabinet should be painted.
3. The interface of the drain pipe in the cabinet should be sealed to prevent water from overflowing. Sealing seals are applied around the water bucket and the water tank to prevent water overflowing from water from penetrating into the wooden material along the gap.
4. The moisture content of the materials used for decoration should be controlled below 15% in the southern region and below 12% in the northern region or heating region.
5. After the wall and floor are basically dry, install the cabinet and wall cabinet.
Welding And Curtting ,Welding And Cutting,Welding And Cutting Safety,Welding And Cutting Outfit
ARKOOL Welding And Curtting,Refrigerant Gas Co., Ltd. , http://www.nbrefrigerant.com