Blue Star Flower Management Method

Blue Star Flower Management Method:

Humidity management: like a humid or semi-dry climate, the relative air temperature of the growing environment is 50-70%. When the relative humidity of the air is too low, the lower leaves are yellowed and shedding, and the upper leaves are dull.

Temperature management: Because it is native to the subtropical region, the temperature requirements for winter are very strict.

The blue star flower ambient temperature stops growing below 8 °C.

Light management: Strong ability to adapt to light. When placed indoors, try to place it in a place with bright light, such as a well-lit living room, bedroom, study, etc. After curing indoors for a period of time (about one month), it is necessary to move it to a place where there is shading outside (the winter has insulation conditions) for a period of time (about one month), so alternately exchanged.

Fertilizer management: For potted plants, in addition to adding organic fertilizer in the upper basin, in the usual maintenance process, proper fertilizer management should be carried out.

Spring, summer and autumn seasons: These three seasons are the peak season for their growth. The management of fertilizer and water is cycled according to the “Huabao” – Qingshui – “Huabao” – clear water, with an interval of about 1-4 days, sunny or The interval period in the high temperature period is shorter, and the interval period is longer or no watering in the rainy or low temperature period.

Winter: During the winter dormancy period, the main task is to control the fertilizer and control the water. The fertilizer management is cycled according to the “Huabao” – Qingshui – Qingshui – “Huabao” – Qingshui – clear water, with an interval of about 3 ~7 days, the interval between sunny days or high temperature period is shorter, and the interval between rainy days or low temperature periods is longer or not.

For plants planted in the ground, in the spring and summer, according to the drought, apply 2 to 4 times of fertilizer: firstly separate a small ditch from 30 to 100 mm outside the root and neck (the larger the plant, the farther away from the root and neck), The width and depth of the trench are 20 cm. Sprinkle 25 to 50 pounds of organic fertilizer in the ditch, or 1 to 5 two-part compound fertilizer (fertilizer), and then pour water. Before the spring, after the spring, fertilize again according to the above method, but do not need watering.

Pruning: In winter, when the plant enters a dormant or semi-dormant period, it is necessary to cut off thin, pest, dead, over-density and other branches. The branches can also be combined with cuttings.

Change the basin: As long as it is cured, it will grow very fast. When growing to a certain size, it is necessary to consider changing it to a larger basin to allow it to continue to grow vigorously. The culture soil and composition ratio for basin change can be selected from the following ones: vegetable garden soil: slag = 3:1; or garden soil: medium coarse river sand: sawdust (slag) = 4:1:2; or paddy soil One of the pond mud and the humus soil.

De-washing: Put the flower to be changed on the ground, first use the slap to pat the circumference of the basin, so that the root is shaken and separated from the basin wall. Turn the flowerpot upside down on the left hand, and gently clamp the index finger and middle finger of the left hand. Live the plant, wrist and fingertips against the basin edge, right hand tapping the pelvic floor, and then use the mother finger to push the roots down from the bottom hole to let the plants come out. After taking it out, gently tap the potting soil with both palms to let the excess soil fall off.

Pot preparation: Select a flower pot of appropriate size. The bottom hole of the pot is covered with two tiles or a thin piece of foam. It is necessary to ensure that the potting soil is not washed out by water, and that the excess water can be made in time. Flow out. Place a layer of ceramsite or broken red brick on the tile or foam as a drainage layer, about 2 to 3 cm thick. The fertilizer layer is placed on the drainage layer, which is about 1 to 3 cm thick. The fertilizer is further thinned with a matrix of about 2 cm to separate the roots from the fertilizer. Finally, the plants are placed in the soil and filled with nutrient soil. The mouth is about 2 to 3 cm.

Pull Handle shape and diverse styles, square tube, pipe, elbow solid, round pull handle.There are semi-oval and U-handle. Made of high-grade stainless steel 304, durable, surface treatment for the drawing, light and so on. Brilliant bright gloss processing, to mirror effect; brushed metal texture is more, full of modern style.

Stainless Steel Pull Handle

Main Door Pull Handles

Back To Back Pull Handle


Such pull handle for large shopping malls, villas, office buildings, entertainment venues, glass doors or wooden doors.

Our advantages are as follows:

1.Can be customized according to the size provided by the customer.

2.304 stainless steel, high-quality products.

3.Variety of styles, choices and diverse.


Pull Handle

Pull Handle,Cheap Pull Handle,Pull Handle Zinc Alloy,Double Side Door Pull Handle

Metfull Metal Products Co., Ltd , http://www.metfull.com