Whole wall installation curtain measurement method:
Like to install curtains on the entire wall, after measuring the actual net width of the wall, the ordinary straight rail should be reduced by 1-2 cm on both sides of the net size, which is convenient for installation and future track maintenance and installation.
The art track should be reduced by 10 cm on both sides of the net size of the wall, so that the decorative head and the wall on the side have proper space and are more beautiful. As shown below
Mounting measurements for U- and L-shaped and three-sided bay windows:
Both the L-shaped window and the bay window (the bay window) need to be installed with a freely curved track. The measurement of the bendable track is actually very convenient. Just add the straight line sizes of the sides where the curtains need to be installed, which is the length of the curved track you need. Do not measure according to the imaginary curvature in the measurement, as long as the measurement is completely in accordance with the straight line. Since the track is longer, it can be easily cut by itself, so there is no problem at all. As shown below
Measurement of curved windows and balconies:
Generally, arc-shaped windows and balconies are installed with free curved rails. When measuring, the soft tape measure is measured along the arc of the window or balcony to measure the actual size, and then the actual length of the track is determined according to the actual installation requirements of the curtain. It is similar to a U-shaped window.
Measurement of Roman blinds, roller blinds, and venetian blinds:
There are two installation methods for installing roman blinds, roller blinds and venetian blinds. One is to install in the window frame, and the rear curtain and the wall are flat. This method is simple to measure, as long as the width and height of the window are measured. The general width should be deducted by 1 cm. First: this can prevent the irregular installation of the window, and the second: it is also easier to install. The other is the installation method outside the window frame, then you can confirm the height and width of the installed product according to how much you actually need. Roman blinds, roller blinds, and venetian blinds are required to be two sizes high and wide.
(Installing the inner frame: the actual width of the window is deducted by 1 cm, in case the window is irregular, the curtain is too long to be installed.)
(Installation frame: 5-10 cm on both sides of the actual size of the window for better shading)
Bath-Shower Faucet,Bathroom Shower Mixer,Single Lever Shower Faucet
Wenzhou Wuhuang Sanitary Ware Co., Ltd , http://www.chbasinfaucet.com