Proper storage and maintenance of safety footwear is essential to ensure their durability, effectiveness, and compliance with safety standards. When selecting labor insurance shoes or boots, it's important to choose the right type based on the working environment and the level of potential hazards. Always look for certified products that meet industry standards and include detailed specifications. Before using the footwear, read the user manual carefully to understand proper usage and care instructions.
For special protective footwear, it's crucial to clean them thoroughly after each use and store them in a clean, dry, and non-polluting area. Proper maintenance not only extends the life of the shoes but also ensures they continue to provide the necessary protection.
**Storage Tips:**
a. After use, brush off any dust or dirt from the shoes and store them in a well-ventilated and dry location.
b. Regularly apply wax to maintain the condition of the leather and avoid prolonged exposure to direct sunlight, which can cause damage.
c. Keep the shoes away from corrosive chemicals or substances that may degrade the materials.
d. To maintain the shape and absorb excess moisture, you can place clean newspapers inside the shoes.
e. If the footwear will not be used for an extended period, wax it, place it back in its original box, and store it in a dry, cool place.
**How to Identify the Material of the Sole:**
The table below provides a guide to identifying different types of sole materials through simple tests:
| Sole Material Type | Discrimination Method |
|--------------------|------------------------|
| PVC Sole | No injection port. Cut a small piece, ignite — flames have green edges and self-extinguish. |
| TPR Sole | Has an injection port. Cut a small piece, ignite — flame burns with a crackling sound, melts when touched, and dissolves in toluene. |
| Rubber Sole | No injection port. Cut a small piece, ignite — emits a burnt rubber smell. |
| EVA Sole | No injection port. Cut a small piece, ignite — burns like a candle, melts, and drips. |
| PU Sole | No injection port. Cut a small piece, ignite — melts and drips. |
| PVC Sole (Alternative) | Cut a small piece, ignite — flame has green edges. |
| PU Leather | Cut a small piece, ignite — flame burns with a crackling sound. |
By following these guidelines, workers can ensure that their safety footwear remains in optimal condition, providing reliable protection in hazardous environments. Always refer to the manufacturer’s instructions for specific care recommendations. This information is intended to help users make informed decisions about the selection, use, and maintenance of labor insurance footwear.
This article comes from: http://
This Magnetic Track Light system is currently the most popular one. It has ultra-thin surface tracks, recessed tracks, and ordinary surface tracks.
The conventional magnetic track has a high height, and if it is recessed, it needs to be pre embedded, which not only incurs high labor costs but also makes it difficult to replace and maintain in the later stage. But our this thin track light system can solve such problems.
Track Light,Thin Magnetic Track Light System,Ultrathin Magnetic Track, Magnetic Light, Magnetic track light
JINGYING , https://www.jingyinglight.com