The surface of solid wood furniture can see the texture of wood, has a strong sense of weight and historical culture, and is loved by many families. However, in addition to pure solid wood furniture, there is also a kind of “imitation solid wood furniture†on the market. From the appearance, the natural texture, feel and color of the wood can be seen as the solid wood furniture, but in fact it is mixed with wood and wood-based panels. Made furniture. So, how should consumers buy?
In addition to design factors, the most important thing is the board. So, what are the types of plates?
★ Solid wood board: The wood board which will be made of intact raw wood is durable, natural and natural. Most of them have the unique smell of natural wood. It is a high-quality board for making high-grade furniture and decoration houses. Generally speaking, it is the best board. However, the solid wood panels are different because of the different logs, such as mahogany is particularly expensive, pine and willow are relatively close to the people.
★Plywood: Plywood is a plate obtained by cutting wood into thin slices and bonding the layers together. Plywood is less solid than solid wood and is a relatively inexpensive board.
★ Natural wood veneer: Cut the precious wood into thin slices and stick it on the outermost layer of the plywood. This is the natural wood veneer. This process allows cheap plywood to have a beautiful texture, which allows more people to buy cheap and beautiful "solid wood furniture", which should have been a joy, but also gave some businesses a chance to use wood Veneer furniture pretends to be a valuable wood solid wood deceiving consumer.
★ Particleboard: Particleboard is a plate made by sticking together the broken pieces of wood. It is also called particle board, particle board and bagasse board. This kind of plate is well recognized. The edge of the plate can clearly see the wood residue. Most of the finished products are not deliberately imitation of natural wood grain, but rather a bright and fashionable appearance. The physical strength of this plate is acceptable, but it is easy to absorb moisture and expand. Blisters will be particularly tragic. In addition, the particle board is denser and relatively heavy, and it is the cheapest furniture board.
â– Select furniture points
★ Look at the appearance: Put your hand on the appearance of the furniture, carefully observe whether the polished surface can be smooth, especially to prevent the table legs and other parts from being rough. Are there any streaks in the pigment? Is the pigment in the corner position too thick? Is there any crack or bubble? Is the paint wrinkled, sticky and leaky? Especially the chair is under the table, the back of the table, the drawer of the cabinet is pulled. Inside, the places that are not normally seen, if they are also relatively fine and not rough, should be more reliable products.
★ Look at the plate: Particleboard is easy to recognize, the key is to judge whether it is genuine solid wood furniture. Observing whether the solid wood is the mystery is to look at the two sides of the same piece of wood and the knot. If you look at a cabinet door, the pattern seen on the outer surface, the inner pattern will not be too different. It is found that the two sides of the pattern correspond to pure solid wood. If the wood grain cannot correspond to the wood veneer. Looking at the board, the focus is on the side and the back. These are common places. If it is a mixed material, the veneer will be used to compare the corners.
As mentioned above, wood species directly affects quality and price, while the market for solid wood furniture will have shoddy things. Consumers should choose a large-scale furniture city with reputableness and ask what wood is in each part. This compares the bottom. The wood itself is more expensive, and if the merchant sells it particularly cheaply, it is suspicious if it is much lower than the market price.
★ Look at the wood and structure: the load-bearing parts of the furniture should not be frugal or cracked. The overall frame cannot be loosened, and it cannot be purchased if there is a break or break. The parts of the natural board used in the furniture shall be sealed and sealed. The various fittings shall not be small, missing or nailed. The edge, top, back and back of the furniture should be purchased with a dovetail or butterfly joint. Heavier furniture should be screwed with maintenance blocks in the corners and glued. As for the back panel, it is also necessary to reflect on whether it can be set and the screws are good.
★ Look at the strength of the board: Press the finger on each panel. If the strength of each panel is not enough, press it hard to feel it.
★ Look at the activity parts: the cabinet door and the drawer switch should be sensitive, and there should be no abnormal noise when opening and closing. Pay special attention to the slides of the drawers. The drawers should be solid and solid, and the screws should be tightened on the outside.
★ Moisture content: The climate of the international regions has an impact on the moisture content of the wood. The moisture content of the wood should not be higher than 1% of the equilibrium moisture content of the applied field. Otherwise, the wood will easily form a detachment and furniture fall apart due to the expansion and contraction. Will cause warping. Although this kind of thing has often been taken care of by dealers, it is very likely that you will avoid unnecessary troubles.
The general review of Jianke.com: The “semi-solid wood furniture†made of practical mixed materials is also very good, and the performance has not shrunk, but the price space is much better. Consumers can buy pleasing furniture with less money. It is a good thing. However, some merchants who use such semi-solid wood furniture to disguise themselves as pure solid wood furniture are really unscrupulous.
[Scan the QR code below, pay attention to the WeChat public number "Jiuzheng Furniture Network "; you can view the popular article " Man who makes furniture, that's it... " wants to communicate with peers to join Jiuzheng Furniture Group: 233437329 】
Steel Pipe used for conveying fluid pipe, such as oil, natural gas, water, gas, steam, etc.Steel pipe contains two types: seamless steel pipe and welded steel pipe .Steel pipe is one of our mainly produces ,made of carbon steel, stainless steel, alloy steel and other special metal materials as required by its customers.
Our factory has already been certified by the ISO9001-2000 Quality Management System, the Environmental Management System, the Occupational Health and Safety Management System, and American Petroleum Institute (API), and obtained the Special Equipment Manufacturing License of PRC (Security Certificate of Registration of Manufacturing Units of Pressure Pipe Components) issued by the State General Administration of Quality Supervision, Inspection and Quarantine, the Membership Certificate of China Petrochemical Resources Market, the Certificate of Class I Natural Gas Supply Network of China, and the Manufacturing Qualification Certificate of Pressure Pipes for Plants. And in strict accordance with the standards specified in or by the aforementioned, it has established its own scientific QA system and its product quality effectively ensured by its complete quality system and scientific manufacturing processes.
Moreover, our factory has set up its own QC Department and Testing Center equipped with superior devices and capable of X-ray flaw detection, magnetic particle tests, metallographic analysis, chemical tests, mechanical properties tests, impact tests, hydraulic tests, spectroscopic tests, and infrared ray monitoring.
Under the guidance of the [quality-first, reputation-foremost, people-oriented, and technology-based" operating principle, Huize develops rapidly. With its quality products and good services, Huize is eager to cooperate with you sincerely for common development.
Steel Pipe
Steel Pipe,Stainless Steel Pipe,Carbon Steel Pipe,Alloy Steel Pipe
Shijiazhuang Huize Pipe Fitting Co., Ltd. , https://www.huizegd.com