The electric signal of the pulse controller makes the armature of the electromagnetic pulse valve move, the vent hole of the air chamber is opened after the valve, the vocal cord of the rear air chamber is out of pressure, the diaphragm moves backward, the compressed air can be blown through the valve output port, and the pulse valve is “openedâ€. status. The compressed air is instantaneously ejected from the valve to form a blowing air stream.
The technical parameters of TMF-Z (DMF-Z) right angle electromagnetic pulse valve are as follows:
Adapt to the environment: temperature -10 + 55 ° C; relative humidity is not more than 85%.
Working medium: clean air, dew point -20 °C.
Injection air source pressure: 0.3-0.6MPa.
Electromagnetic pilot valve operating voltage, current: DC24V, 0.8A; AC220V, 0.14A; AC110V, 0.3A pulse valve air inlet to the air bag, the air outlet is connected to the blow pipe. When connecting, the teflon raw material tape should be used between the threads to ensure the seal. When connecting, be careful that the length of the intake end thread can not be greater than one third of the threaded wire.
Steel poles are commonly used to carry several types of electric power lines, distribution lines and lighting system. Distribution lines carry power from local substations to customers. They generally carry voltages from 4.6 to 33kV for distances up to 30 miles, and include transformers to step the voltage down from the primary voltage to the lower secondary voltage used by the customer. A service drop carries this lower voltage to the customer's premises.
Steel Pole
Steel Pole,Steel Street Light Poles,Galvanized Steel Pole,Steel Pole Tower
Yixing Steel Pole International Trading Co., Ltd , http://www.yx-steelpole.com