For cork furniture, use wax and walnut oil at least once a month to keep the surface smooth and moderately bright. Wax should not be too dense, otherwise it will block the pores of the wood.
For hardwood furniture, keep the air at a certain humidity and adjust to the proper temperature. At least once a month, wax and walnut oil can make the furniture surface smooth and have a moderate luster.
For gold-painted furniture, maintaining the temperature in the air and adjusting it to the proper temperature is critical to the cracking and flaking of the gold.
Furniture maintenance should conform to the wood, that is, the "temper" of the furniture. Especially for classical furniture, daily maintenance should pay attention to minimize unnecessary losses caused by human factors. Michael Amini introduces five classical furniture maintenance methods.
1. Prevent the case from falling
There is a case called a shelf, which is very long, thick and heavy. Its case is not integral with the leg, but is detachable. The north is commonly known as "a piece of jade", and the south is called "stalk plate". It is popular in the late Qing Dynasty. People generally use it to put a cumbersome self-timer or mountain bonsai.
Because the items on the case are very bulky, the pressure on the case is very high. The two ends of the case are supported by the leg of the case, so it is not too difficult, but the middle of the case is suspended. If there is a long time, there is a danger of collapse. In order to avoid this phenomenon, the case should be turned over every other year or half a year, and the slightly curved face will be restored by changing the direction of the force.
2, different manufacturers, different methods of maintenance of the surface of the product
Southern furniture is painted to prevent moisture, because the southern climate is humid, and in order to prevent moisture, the surface of the furniture is basically covered with a thin layer of lacquer. Su Zuo furniture is characterized by lacquering both inside and outside, and it is protected inside and outside. Guangzuo furniture also wipes a layer of paint. Painting is difficult for the average person, so you can ask a professional to do it. Beijing-made hardwood furniture is not painted, only a layer of wax on the surface. Because the northern climate is dry, there is no need to paint, and after the wax is burned, the furniture will be repeatedly rubbed in the process of use, and the surface wax will seep into the wood, oxidize and produce a slurry. The surface of the furniture that has been formed into a pulp can not be boiled by boiling water, nor can it be stained with a very soluble liquid, such as gasoline, which would damage the patina.
3, how to maintain the desktop
There is a saying that is good: "The cold table can't make hot tea." This sentence can be said to conform to the wood, because the ambient temperature of the stored furniture can not be suddenly cooled. For example, furniture with stone surfaces (such as tables, screens, etc.) should not be placed outdoors in the winter, nor in the summer in the sun to avoid cracking.
The oil on the table can be wiped with alcohol. If there is no alcohol, it can be wiped with high-alcohol. This is a common method used by older Beijingers.
4, waxing makes the furniture shine
If the furniture is used for a long time, the gloss will gradually disappear and affect the appearance. It should be noted that waxing should be carried out after the dust has been completely removed, otherwise wax spots will form or scratches will occur. When waxing, it is necessary to master the principle of shallow to deep, from point to surface, step by step, and evenly wax.
5, dusting with a soft cotton cloth
Many furniture have carved parts or complicated hollow parts, which are especially easy to accumulate dust. Wipe with a soft cotton cloth, but remember two things:
First, you can't use towels. Because the hair of the towel is a small ring structure composed of wires, it will damage the carved, corner and fine cracks of the wood grain;
Second, you can not use a damp cloth. Wet cloth is the natural enemy of ancient furniture, it will bring about the drastic changes of the surface of the furniture, which is contrary to the principle of “compliance with woodâ€. When the moisture and dust in the wet cloth are mixed, it will form a granule. Once rubbed, the surface of the furniture will be damaged, which will damage the original patina of the furniture, and the furniture surface will be cracked in the future.
Water Pump Part Series
1) Aluminum die casting part/Water Pump Part series
2) Water pump part series conforms to ISO9001 standard
3) Clients' drawings and samples are highly followed.
4) Machining all sorts of styles, according to customers' requirements
5) Strong R&D center design system and strict inspection processes to ensure the water pump part series quality.
6) Aluminum Die Casting suitable
for communications, auto parts, lamp part series, water pump part
series, power tool series, radiator part series, anti-static flooring
products and Other Series Products.
Water Pump Part Series Production Flow:
Drawings→ mould making →raw casting → sandblasting →rough machining or
finish machining →surface treatment →product check→ packing →delivery
strict
 |
 |
Our Advantage
(1) Ten years of experience in manufacturing and exporting water pump part series.
(2) OEM and custom-made service for water pump part series.
(3) All kinds of castings can be manufactured according to drawing, sample or specific industry standard.
(4) Strong engineering team makes high quality
(5) The coordinated service (casting, machining and surface treatment) make lower price possible.
(6) Advanced-level equipments.
(7) Full material testing process and quality control system.
(8) water pump part series quality warranty and on time delivery.
If you are interested, please contact us to talk about the details for water pump part series. You need to send us your drawing or sample to make mold first. Then we quote you price, if price accepted, we will open mold for you and send you sample before mass production.
Water Pump Part Series
Water Pump Part,Die Casting Water Pump Part,Aluminium Die Casting Parts
Ningbo Bowang Machinery Co.,Ltd , http://en.zjbwjx.com