1. For the newly purchased leather sofa, first wash the wet towel with water, wring it out, wipe off the dust and dirt on the surface of the sofa, and then gently wipe the surface of the sofa with the care agent one or two times, so as to form a protective film on the surface of the leather. The dirt in the future is not easy to penetrate into the pores of the leather, which is convenient for future cleaning. If the time allows a weekly wipe, the effect is best.
2. To avoid sharp scratches on leather.
3. To avoid oil stains, ballpoint pens, inks, etc. stain the sofa. If you find stains on the sofa, you should immediately clean it with leather cleaner. If there is no leather cleaner, use a clean white towel with a little alcohol to lightly smudge the stain, then dry it with a dry wet towel, and finally use a protective agent. . It is best to let it dry naturally, and don't force it to dry. In addition, you can also do a small experiment in the inconspicuous corner before wiping, to make sure that the cortex will not be damaged and then wiped.
4. If water stains or beverages are spilled on the leather sofa, use a clean cloth or sponge to dry the water, then wipe it with a damp cloth, and finally let it dry naturally. Never blow it dry with a hair dryer.
5. If you draw a ballpoint pen, you should wipe it off with an eraser as soon as possible; if it is stained with oil, you can wipe it off with a dry cloth, let the rest evaporate naturally, or use a leather cleaner, but do not use water. Scrub directly.
6. The daily care of the sofa can be wiped with a wrung wet towel. Clean the sofa with leather cleaner for about 2-3 months, or use a household vacuum cleaner to remove dust from the sofa surface.
7. If you want to clean the dirt generated by long-term use, the most ideal way is: first, use a mild detergent diluted with warm water (1% ~ 3%) to wipe first, then wipe the cleaning solution with a wrung clean water rag Finally, wipe it with a dry cloth. After it is completely dry, wipe it evenly with an appropriate amount of leather care agent.
8. In order to prolong the service life, it is necessary to prevent the child from jumping and playing on the sofa. The body with sweat can not directly contact the leather sofa.
9. Place the sofa at a distance of 5cm-10cm and keep it ventilated.
10. Avoid direct sunlight on the sofa, which will cause the leather to crack and fade. If the living room is often exposed to sunlight, it may be necessary to adjust the position of several sofas to prevent chromatic aberration from time to time; for places with high humidity, you can use the weak sunlight of 8:00 to 10:00 in the morning for 7 days, 1 hour per day. Do it once in about 3 months.
11. The cleaning method of the matte leather sofa can not be used in the above cleaning method (except for the oil stain on the leather), and can be gently brushed with a fine copper brush to restore its beauty.
12. For dark leather furniture, rub it once a year with castor oil or hoof oil (obtained from cow's hooves) to prevent cracking. Light leather is rubbed with Vaseline. Do not hold wax on leather furniture because leather does not absorb wax.
13. If the dermis appears to start to dry, use a cotton lump to apply a little special leather activator on it for 24 hours to absorb, then wipe with a clean soft cloth, or use a sponge dipped in the following solution. The composition of this solution is: household ammonia 5 ml (1 teaspoon), vinegar 20 ml (4 teaspoons) and water 600 ml (1 pint). Then apply a castor oil to a rag. If the leather appears dry, polish it with furniture grease.
14. If you find any damage to the leather house, do not repair it yourself. Ask a professional to handle it.
Coated Polyester Geogrid ( PET ) : Ultimate Tensile Strengths from 25kN/m to 1200kN/m ), PET ( Uniaxial geogrids ) and PET ( Biaxial geogrids ) : Ultimate tensile strengths from 25KN/m to 1200KN/m.
Polyester uniaxial & Polyester bi-axial Geogrid range: Flexible uniaxial or biaxial geogrid constructed of high tenacity , high molecular weight PET – Polyester with black PVC saturation coating by using the state of art knitting process .
1. It reinforce old asphalt concrete road surface and asphalt layer, and prevents damage ;
2. It is used for rebuilding cement concrete road surface into composite road surface and restraining reflection caused by block contraction .
3. It is used in road expansion and improvment project and crack caused by old and new combination position and uneven sedimentation ;
4. It is used in soft soil base reinforcement treatment , is favorable for soft soil water separation and concretion,restrains sedimentation effectivly,distributes stress uniformly and improve overall strength of road base;
5. It is sued for preventing contraction crack caused by new road semi-rigid base layer,and reinforces and prevents road surface crack caused by foundation crack reflection.
Polyester Geogrid
Warp Knitted Polyester Geogrid, Pvc Coated Uniaxial Polyester Geogrid, Pvc Coated Pet Uniaxial Geogrid, Polyester Geogrid For The Roads
Feicheng Lianyi Engineering Plastics Co., Ltd , http://www.lianyigeosynthetics.com