| Home>Bearing knowledge>Analysis of the serious bearing wear of Raymond mill |
Analysis of the Reasons for the Severe Bearing Wear of Raymond Mill
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
First, the equipment is not appropriate (about 16%)
1. Use brute force when equipment; directly hit the bearing with a hammer to damage the bearing; it is the primary cause of deformation.
2, the equipment is not in place; the equipment has errors or is not loaded into the bearing position; the bearing clearance is too small. The inner and outer rings are not in the same rotation center; the small heart ball mill is formed.
Advocate: Select appropriate or professional bearing equipment; equipment should be tested with special equipment.
Second, poor smoothness (about 50%)
According to the survey; poor smoothness is one of the primary reasons for the formation of premature bearing damage. Coal gangue pulverizer. The primary reason is: not added smoothing agent or smooth oil in time; smoothing agent or smooth oil is not filled in place; smoothing agent or smooth oil The selection is not appropriate; the smooth method is not accurate and so on.
Advocate: Select the precise smoothing agent or smooth oil; use the precise smooth filling method ball mill manufacturer.
Third, pollution (about 14%)
Pollution will also lead to premature bearing damage; pollution refers to sand dust, metal shavings, etc. into the bearing. The main reasons include: prematurely open the bearing packaging before use; form pollution; equipment is unsanitary; the formation of pollution; bearing The working environment is unsanitary; the working medium is contaminated by a counter crusher.
Advocate: It is best not to unpack the bearing before use; adhere to the sanitation of the equipment environment; remove the bearing to be used; enhance the sealing equipment of the bearing.
Fourth, fatigue (about 34%)
Fatigue damage is a common method of damage to the screw washing machine. Common causes of fatigue damage may be: the bearing is overloaded at any time; not repaired in time; repair is not proper; equipment is aging.
Proposition: Pick the right bearing type; replace the price of the fatigue bearing crusher in time.
The above are the most common reasons for the early damage of the bearing; the reason for the early damage of the bearing is multifaceted; the above is the primary reason for thinking; sometimes it may be the reason for the induction. The bearing selection is accurate; the equipment method is accurate; the smooth method And the smoothing agent is selected accurately; the bearing is a ceramic ball mill that can work normally at normal times.
Recommend to friends comments close window
| Bearing related knowledge |
| How to avoid the heat of the bearing of the sand making machine FAG imported bearing inner ring fixing method has a good way to distinguish bearing quality SKF imported bearing selection tips Analysis of NSK skills: equipment for cylindrical bore bearings |
This article links to http://
Please indicate the bearing network http://
Previous:The effect of heat treatment on the arrangement and hardness of tool steel 5Cr8MoVSi Next: Smooth handling of oil film NSK bearing oil
License plate capture cameras, also known as license plate recognition / LPR cameras, are a specialized type of video surveillance camera designed to capture numbers and letters of license plates on still or moving vehicles. LPR cameras are designed with built-in software and hardware that compensates for speed, weather, and headlight glare. Regular security cameras typically can not compensate for these variables to capture a usable video that identifies license plate numbers. This page contains analog CCTV, HD-over-Coax, network IP LPR cameras. Noted: Our LPR Camera only support License Plate Recording, don't support Capturing and recognizating License Plate. It uses to Parking Lot, Highway, etc.
LPR Camera
LPR Camera,Hikvision LPR Camera,Hikvision LPR,LPR Camera System
Shenzhen Wardmay Technology Co., Limited , https://www.wardmaycctv.com