First, the poor quality of tiles
Some inferior tiles have insufficient hardness. If the load is too high during use, cracking will occur (mainly the floor tiles).
Precautionary measures: choose a branded product. The hardness and density of the tiles are directly related. When you buy, turn the bricks over to see the back. The more delicate the grains, the higher the density of the tiles. The higher the hardness, the better the quality. You can sprinkle water on the back of the tiles if the water does not infiltrate. Downward flow shows that the tile has a higher density and a higher hardness; if the water infiltrates, the tile has a lower density and a lower hardness.
Second, different furnace tile color difference
As long as the tiles are burned out of the same oven, there will be no color difference, and different ovens will have color differences.
Precautionary measures: buy tiles and goods, replenishment, use the same furnace to produce products; tiles arrive, randomly draw out a few tiles from each box, carefully observe whether there is color; buy tiles when you want to make room because In the process of transportation or paving, it is inevitable that there will be damage. If there is no backup, it will be very difficult to avoid chromatic aberration when replenishing; if replenishment is needed, it should be as early as possible, shorten the replenishment cycle as much as possible, long time, the same batch of products Sold out, it is difficult to make up the tile without color; tile remaining after paving should be kept in reserve, to prevent some bricks from falling off after a period of time, it is difficult to make up the same batch of replenishment, will cause color .
Third, the tile is not smooth
Some tiles have just burned out and are very smooth, but after a while, the corners of the tiles will be upturned, causing the tiles to bend.
Precautionary measures: Ceramic tiles undergo a certain natural deformation cycle due to cooling after being fired at a high temperature. Qualified manufacturers will calculate and set the scale of the natural deformation of the tile, so that the tile just burned up slightly arched, so that after the natural deformation cycle will reach the required flatness; the flatness of the tile is not easy to visually observe It can only be found in the process of paving, and the experienced tile union promptly reminds the owners after finding problems.
Fourth, the brick body has scratches or color wear
Due to the glazed surface, the glazed tile is more prone to scratches or patterns of wear compared to polished tiles.
Precautionary measures: When purchasing glazed tiles, pay attention to the selection of products with stronger production strength. Tile glazes are thicker and the firing temperature is higher. Normally, pattern wear is not caused during use. The quality of glazed tiles is true and the texture is thick. The three-dimensional effect of the flower piece is good, and the tile piece with poor quality is flat and has no three-dimensional feeling, and even the grain of the paper can be seen; if the glazed tile is seriously scratched and affects the appearance, the tile can only be replaced. High hardness, good quality polished tiles generally do not appear scratches. The pattern of the polished tile is fired in the interior of the brick body, and generally the pattern will not be worn out.
Fifth, the surface of the tile stains
If the tiles are sprinkled with colored liquids such as tea stains and ink, they will infiltrate if left uncleared for a long time, leaving unsightly marks.
Remedy: After the tiles have been stained, clean them with a damp cloth or disinfectant as soon as possible. When buying tiles, choose a non-porous tile with high hardness and density and anti-fouling treatment.
Six, glazed tiles out of glaze or cracking
In areas with strong variations in temperature, such as countertops or shower areas, tiles show a hairline irregular crack east to west.
Preventive measures: only glazed tiles will appear this problem, it is recommended to choose a good brand, good quality glazed tiles, on the one hand the glaze to be thick; the other hand, the wall tiles must have a certain degree of water absorption and absorb water does not affect the glaze The pattern can be tested by sprinkling water on the back of the tile. The tiles will not seep through the glaze after water absorption. The watermark is also not visible on the glaze. Such tiles are qualified.
Seven, brick seam yellowing black
Tiles use for a long time and the brick seams will turn yellow and black, affecting the appearance.
Remedy: Mainly caused by the use of white cement caulking in poor construction. Currently, special grout is used for construction. The sealant has high hardness, good paste, smooth surface, and a variety of colors according to the preferences of the owners, generally do not change color after a long time, but the price is slightly expensive.
â– Four major misunderstandings
First, seamless shop easy to clean
Brick joints often become a cleanup problem. For a long time, they are more likely to become a filth. Some decoration teams should promote the seamless paving of this demand, calling it an advanced technology that not only facilitates cleanup, but also closely connects patterns. The effect is beautiful and generous.
Crack: Seamless paving is just a promotional gimmick. Any object has the phenomenon of thermal expansion and contraction, as well as cement and ceramic tiles. Paving must be reserved for certain gaps, but the gap size should be appropriate, according to the specifications of the brick, brand, color, design style and consumer preferences, generally very small, will not affect the paving effect. If no seams are left, the cement and tiles will expand when heated slightly, causing the tiles to deform and crack.
Second, the brick does not break the high hardness
Some merchants to attract customers, on-site experiments to verify the hardness of the tile - a piece of tile upright, "click" to push down and fell to the ground, the tile is safe and sound, in order to confirm the high hardness of the tile.
Crack: This is just a marketing tool, there is no scientific basis for this experiment can prove the hardness of the tile. In fact, all brands of tiles will not be broken down in this way, but as long as you place an item underneath, basically all the tiles will be broken, and the experiment itself is meaningless.
Third, the thicker the ceramic tile, the more solid
Some consumers blindly listened to the false propaganda of some businesses and believed that the thicker and more durable the tiles are, in fact, a misunderstanding.
Crack: whether the tile is strong depends on its hardness, and the hardness is directly affected by the density of the brick, so not the thicker the tile is, the greater the hardness is, but a certain volume of the tile, the greater the weight the greater the hardness, the more the tile solid.
Fourth, poor anti-skid effect of polished tiles
It is very important that the floor tile is safe and not slippery, especially the family that has the elderly child pays more attention to the anti-slip effect of the tile. The surface of the polished tile is bright and bright, and many consumers think that its anti-skid effect is poor. If water is spilled, it will increase the safety risk, so that they can't avoid it. Instead, they have to choose the "light-contained" matt ceramic tiles.
Crack: In fact, all the polished tiles are non-slip. If there is dirt on the bricks, the water will be astringent, so as long as the daily cleaning is done, it will not affect the anti-skid effect. In the anti-skid performance, the polished tiles are the same as the matt tiles.
Tile lighting brand cement home decoration decoration design style decoration decoration style tile price tile specification
Full Automatic High Speed Circular Saw,High Speed Circular Band Saw Machine,Automatic High Speed Circular Saw,Round Band Saw Blades
Lishui Aiteli Machine Equipment Co.,Ltd , https://www.aitelimachine.com