Shiyou Flooring
After the strong typhoon Weimarson struck, the homes of many residents in our province, especially Haikou and Wenchang, have been soaked in water. Household experts reminded that although the accumulated water has gradually subsided, the residents should not be taken lightly, and the water-foamed floor should be properly handled in time, which can effectively avoid the trouble of floor warping and re-laying.
Reinforced floor soaking water suggest natural evaporation
Because laminate flooring has the characteristics of easy care, wear-resistant surface, easy deformation after laying, good impact resistance and flame retardancy, it is very popular among consumers. Master Chen, who has rich experience in floor maintenance, said that the reinforced floor is more waterproof than other floors. Usually the water is poured on the floor, as long as the surface is dried as soon as possible, it will be fine.
After the reinforced floor soaks in water, the furniture on the floor should be removed, try not to step on it, and drain the surface water of the floor quickly. Then remove the baseboards at the edge of the floor as soon as possible to expose the expansion joints of the floor, and let the expansion joints disperse the water vapor. "Do not pry the floor to dry, it will cause damage to the reinforced floor and may not be used again", Chen The master reminded.
Depending on the amount of water soaking, it usually takes about 7 to 15 days to completely dry. For floors with good quality or not soaked for a long time, it can recover by itself. If it is found that the warping or flatness cannot be recovered after 15 days, it should be considered Replace it. Master Chen suggested: "If the reinforced floor is warped and deformed after soaking in water, it is best to replace it. It is not recommended to plan the arched part and then repaint the treatment method, because it will cause inconsistency with other boards and the whole The uneven thickness of the board makes the stress different, and pits are easy to appear. "
The solid wood floor is soaked with water and the word "Jing" is stacked and shaded.
The solid wood floor is made of pure solid wood, which preserves the natural properties of the wood: it is easy to deform after absorbing water. After the solid wood floor is immersed in water, the water on the surface should be dried as soon as possible. At the same time, you can also use a vacuum cleaner to align the splicing gap of the immersed floor to absorb water vapor. Or use a blower to blow the splicing seam with cold air until it is dry, but never use hot air to prevent the surface from being dried and deformed due to heating and drying.
If the solid wood floor is soaked in water over a large area, “it is very important to keep the floor dry without deformation.†Master Chen suggested that after finishing the surface layer, the floor should be pryed up from the gap of the expansion joint and piece by piece with absorbent cloth Wipe dry and place them in the shape of a "well". The bottom should be elevated and separated, and the back of the floor should face up to prevent the surface from drying out due to rapid drying. At the same time, it should be placed in a ventilated place to dry. Under normal circumstances, as long as the disaster is not serious, the rescue is timely, and after the floor is dry, it can be used by professionals for re-paving.
Composite floor soaking combined strengthening and solid wood floor treatment method
The advantage of composite flooring is that it not only has the stability of reinforced flooring, but also retains the pure natural feeling of solid wood flooring on the floor surface. Master Chen advises everyone: "The first aid method after the composite floor is soaked, that is, the combination of the reinforced floor and the solid wood floor soaking treatment method, although the composite floor is better than the solid wood, but because the surface layer is pure solid wood, so After soaking, it should be handled according to the actual situation. "
If there is a small area of ​​water, and the amount of water is not large, then treat the dry surface water as soon as possible, and use a vacuum cleaner or a blower to cool the air to absorb the water immersed in the gap between the floors. If a large area is immersed in water, the skirting lines around should be removed as soon as possible, and the immersed floor should be pried up, and the bricks or other things should be used to heighten the space, and the floor should be stacked and shaded with the word "well". At the same time, a fan can be used to dry the open ground and the floor where only the surface is submerged.
The above content is provided by Shiyou Flooring . Buy the floor and choose Shiyou Flooring !
Maijin co-Extrusion Wpc Decking is WPCdecking of the 2nd generation upgrade products, its beautiful degree, wear-resisting degree, anti-aging performance is better than first generation product.
Maijin co-extrusion Wpc Decking is mainly made of wood powder (accounting for about 55%), polyethylene (accounting for about 35%) and necessary chemical additives, such as antioxidant, lubricant, colorant, UV absorber, etc. (accounting for about 10%). Under high temperature and high pressure, raw materials are extruded by professional wood plastic extrusion equipment. Because of its natural fiber composition, Maijin co-extrusion WPC Decking has a texture comparable to that of natural wood and a performance higher than that of wood.
Wpc Composite Decking,Co Extruded Wpc Decking,Low Carbon Wpc Decking,Wear Resisting Wpc Composite Decking
Dalian Huimingmaijin New Materials Co.,Ltd , https://www.maijinfloor.com