In recent years, solid wood furniture has been popular among consumers because of its natural environmental protection and long service life. However, solid wood furniture also has its own shortcomings. The change of water content is easy to crack and deform, the surface is also easy to be burned and scratched, and there is danger of decaying insects in wet weather. Many consumers have spent tens of thousands of dollars to purchase solid wood furniture, but there are misunderstandings in the furniture that do not require care and maintenance, resulting in "scarred" solid wood furniture in the home! ! The following Xiaobian of Nanyang Hu's furniture says how to extend the service life of solid wood furniture.
First, to prevent cracking deformation of solid wood furniture: anti-exposure + micro-hydration + wax mask
1. Sun protection: Do not place the solid wood furniture at the air conditioning outlet and the direct sunlight. It should be at least 50cm away from the heat source and air conditioner outlet. Light can be blocked by curtains.2, appropriate hydration (do not overdose): usually clean, it is best to use a little rag to wipe, but not too wet, so that it can not only make the effect of hydration, but also does not make the furniture damp. Especially in the northern winter, indoor air is dry, entering the heating period, coupled with the use of air conditioning, is a test for solid wood furniture, so proper hydration is necessary!
3. Regularly make a solid wax “maskâ€: Although many solid wood furniture manufacturers' products are manufactured after strict drying procedures, their protection and care should not be taken lightly. Every 6-12 months, use special furniture paste. Wax is a layer of wax on the furniture. Before waxing, the old wax is wiped off with a milder non-alkaline soapy water.
Furniture cracking remedy:
Step 1: Prepare some used newspapers and cut them into scraps with scissors.
Step 2: Add appropriate amount of alum to the paper dust and mix well.
Step 3: Pour the mixture of paper dust and alum into a previously prepared container, add a small amount of water, and stir again.
Step 4: Place the container on top of the simmer and cook into a paste. Stir constantly during cooking.
Step 5: Fill the cooked paste mixture into the cracks of the solid wood furniture and let it dry naturally.
Step 6: Use a paint pen or a special furniture repair pen to apply color to the fill area to make it similar to the entire furniture color.
The method described above is very simple and convenient, and the materials are very common. Friends in need can follow the above steps to repair cracked solid wood furniture step by step!
If it is not operated or the furniture cracking is very serious, it is recommended to ask a professional furniture cosmetologist for treatment.
Second, to prevent solid wood furniture burns, scratches 1, furniture surface should avoid rubbing with hard objects, so as not to damage the paint surface and wood surface texture, such as the placement of porcelain and other decorative items should be particularly careful, it is best to pad a soft cloth.
2, hot water cups, etc. can not be placed directly on the surface of the furniture, leaving traces that are not easy to remove. Color liquids, such as ink, should never be sprinkled on solid wood.
Remedy small coup:
Walnut kernel VS light-colored furniture scratches Prepare a few walnut kernels, according to the amount you need to restore, use walnut kernels to repeatedly apply on the top of the scraping, not long, the wooden furniture will restore its original appearance.
Coffee powder VS dark furniture scratches dark furniture, after scratches, do not worry, you can use coffee powder to wipe repeatedly in the scratched part, after a short while, then wipe with a damp cloth, and then apply once according to the method However, after this treatment, the scratches on the furniture almost disappeared.
Third, to prevent the corrosion of solid wood furniture insects as much as possible in the decoration or after the time inside spray anti- insect water, Nanyang Hu's furniture reminds consumers: the purchase of pure wood furniture must ensure that after pest control. In spring and summer, it is best to have mosquito nets when opening windows. If there are white bugs, spray them.
remedy:
1. Take out the items in the furniture of the insects and clean them. If they can't be cleaned, put them in the sun and dry them. The furniture should be wiped several times with disinfectant. After cleaning, thoroughly ventilate and dry; wood furniture damaged by mites or termites. A small amount of insecticide liquid (dichlorvos) can be dripped into the insect hole, and the pepper or pepper can be used to form the end and stuffed into the insect hole.
2. Apply paraffin oil to the insects and apply it continuously for 10 days. However, remember that tableware and other furniture such as cabinets cannot use insecticides and paraffin oil.
related articles
Nanyang Hu's furniture teaches you the solid wood wardrobe pest control tips
Nanyang Hu's interpretation of the reasons for the continued heating of solid wood furniture consumption
How to distinguish solid wood furniture from panel furniture? Nanyang Hu's furniture tells you
Nanyang Hu's furniture teaches you seven tips for purchasing natural and environmentally friendly solid wood furniture
Wire thread inserts are helically coiled fastening devices that provide permanent, wear-resistant screw threads that exceed the strength of most parent material; the inserts are designed to protect tapped holes against failures due to stripping, seizing, corrosion, and wear.
Threaded inserts are typically used when the object in which a threaded fastener is being installed is made of a soft material. For hard materials, a screw or bolt can be often driven into the object without the need for a threaded insert. A simple solution is to use a threaded insert.
Wire Thread Insert,Wire Thread Auto Repair Inserts,Metal Wire Thread Insert,Wire Thread Repairing Insert
Shenyang Helisert Technology Co., Ltd , https://www.helisert.com