Recently, reader Meng reflected that the newly installed whole wardrobe in the home "has a taste", and it has not been dispersed after a month. However, the attitude of the manufacturer made him very angry. "They insisted that the furniture is fine. If you don't believe it, let me test it." However, Mr. Meng was hesitant to learn that the inspection needed to destroy the furniture. “Do you think it is necessary to test it?†“Is it possible to get a piece of plate to get it?†The reporter interviewed the relevant experts. Experts said that consumers are not familiar with the methods and procedures of furniture testing, and they will go into misunderstandings if they are not careful. Misunderstanding detection only needs one piece of plate interpretation: Many consumers simply think that although furniture testing is a destructive experiment, it only needs to saw a board to detect it. If it is in a hidden part such as a drawer, even if the test is qualified. The loss can also be tolerated. However, the reporter carefully asked the experts and relevant testing agencies to find out that this is not the case. First of all, if a comprehensive and detailed inspection is to be carried out, the consumer needs to carry the problem furniture as a whole to the inspection organization. The inspectors will make detailed identification of the materials of the various parts of the furniture. For example, the number of particleboards, the number of MDF, and then the number of samples according to the proportion of materials of different materials, and then random sampling. Such test results can be regarded as fair and comprehensive. But the consequence is that the furniture is completely scrapped. However, if the consumer wants to make a piece of sheet for testing, it can be executed. After consulting the National Furniture and Indoor Environmental Quality Supervision and Inspection Center, the reporter learned that consumers can take a 500mm × 500mm sample for center testing. The price is 600 yuan, and the test results can be obtained after two weeks. The price is comparable to the price of the whole piece of furniture. However, "If the acquisition is a door panel, then the result can only be responsible for the door panel." Misunderstandings are useful to detect and interpret: If consumers feel that a certain home has a taste, the current wooden furniture is about the detection of such harmful substances. The project only has one formaldehyde. The feeling of formaldehyde is usually irritating, especially for mucosal sites such as the eyes. If the consumer does feel a strong pungent odor, then the furniture is definitely a problem. But in fact, there are still cases where a lot of artificial board products use certain tree species, and the finished product itself has some special tastes. Many consumers will test it, so it can only be in vain. Therefore, in order to avoid unnecessary losses, it is recommended to fully cooperate with the merchant before the test. View the test report of the same batch of products in the furniture. If the merchant can't provide any evidence, it's not too late to do the test. In addition, for VOC and benzene in furniture, it is currently impossible to detect harmful substances in wood furniture. Therefore, before buying, you can check the inspection report on the environmental performance of furniture lacquer. Misunderstanding of formaldehyde over standard can be interpreted: a reader reflects that he suspects that the formaldehyde in the wardrobe of the home exceeds the standard, and the treatment method given by the manufacturer can be taken back to the factory for professional institutions. After asking the experts, the reporter learned that this method is not reliable. First of all, the company that conducts professional indoor air management mainly manages the overall indoor environment, and “can’t do it†for the business of individual products. In addition, the so-called furniture management, whether it is adsorption method or chemical spray, can only reduce the release of formaldehyde into the air in the furniture in a short time. The release of formaldehyde in the board is long-term and cannot be cured. Jinghua Times reporter Ma Xi>>Special reminder to check the furniture inspection after the consultation should go to the inspection agency approved by the merchant for testing. If partial sampling is selected, the sampling process should include the presence of the merchant, or video recording to allow the merchant to confirm that the sample being sent is indeed from its product. When submitting the inspection, it is best for the consumer to go to the inspection agency registration with the merchant or the consumer to carry the relevant department such as the consumer association, the industry and commerce bureau, etc. to unilaterally register.
Hotel Kettle,Hospitality Kettles,Hotel Electric Kettle,Hotel Room Kettle
Uni-Sec (Ningbo) Electronics Technology Co., Ltd. , https://www.hospitalityunisec.com