Dust is made up of fiber, sand and bauxite, and many people are used to cleaning the surface of furniture with a dry rag. In fact, these fine particles will damage the furniture finish in the rubbing of the back and forth. Although these scratches are minimal and even invisible to the naked eye, over time, the surface of the furniture will be dull and rough, and the light will not be.
Do not wipe the furniture with coarse cloth or old clothes.
It is best to wipe the furniture with a water-absorbent fabric such as a towel, cotton cloth, cotton fabric or flannel. Coarse cloth, wired head cloth or old clothes that cause scratches on the surface of furniture, such as stitches and buttons, should be avoided.
Furniture care spray wax can not be used to clean and maintain the leather sofa
Many furniture care spray wax instructions can be used to maintain leather sofas, causing many housewives to make mistakes. The salesperson in the furniture store knows that the furniture care spray can only be used to spray the surface of wooden furniture and cannot be sprayed on the sofa. This is because the leather sofa is actually the skin of the animal. Once the wax is sprayed on it, the pores of the leather product will be blocked. After a long time, the leather will age and shorten its service life.
Do not wash furniture with soap, detergent or water
Cleaning products such as soapy water and detergent can not only effectively remove dust accumulated on the furniture surface, but also remove the sand particles before lighting, but because they are corrosive, they will damage the furniture surface and make the furniture The lacquer surface becomes dull.
PRODUCT NAME: Aluminum Phosphate, Aluminum Metaphosphate ,Potassium Silicate Curing Agent
PRODUCT TYPE: High Temperature Materials, Binder
PRODUCT APPEARANCE: White Powder
CHEMICAL CLASS:AlPO4
CAS No．:7784-30-7.
PRODUCT APPLICATION: It can solidify potassium silicate(other name: potassium water glass) at room temperature. It is mostly used as binder and curing agent in the production of Hi-Temp Refractory Materials for kiln. It also serves as fluxing agent in the production of special glass, as binder in fabrication of ceramics or tooth, and so on.
Aluminum phosphate adhesive has excellent heat-resistance and weather-resistance, not only a widely used adhesive in refractories, it`s also an importantingredient in inorganic coatings(such as powder coating). It also used in the production of siliceous,high-aluminum,magnesian, silicon carbide and oxides of concrete.
Aluminum metaphosphate is mainly used in producing special optical glass;Also can be used in manufacturing enamel, glaze, as well as the development of new materials, etc.
TECHNICAL DATA
|
Aluminum Metaphosphate |
||
|
Appearance |
White powder |
White powder |
|
P2O5 % |
60-70 |
65-75 |
|
Al2O3 % |
25-35 |
18-22 |
|
The PH Value |
2-4 |
2-4 |
|
Residue on sieve( 45um) |
≤0.5% |
≤0.5% |
STANDARD PACKAGING:25kg/bag, Plastic-lined and plastic-coated woven bags or Composite paper bags.
TRANSPORT AND STORAGE
Protect against weathering. Store in a dry place and avoid extreme fluctuations in temperature. Special conditions for opened packaging: Close bags after use to prevent the absorption of moisture and contamination.
SAFETY
The product is not classified as dangerous under the relevant EC directives and corresponding national regulations valid in the individual EU member states. It is not dangerous according to transport regulations. In countries outside the EU, compliance with the respective national legislation concerning the classification, packaging, labeling and transport of dangerous substances must be ensured.
The information contained in the safety data sheet should be observed.
This contains information on handing, product safety and ecology.
Binder Series
Aluminum Dihydrogen Phosphate Series, Aluminum Phosphate Series, Binding Materials
shijiazhuang city xinsheng chemical co.,ltd , http://www.xsphos.com