The use of artificially stripped flat wire insulation paint is time consuming and labor intensive. To this end, we have made a cutting machine that strips the flat wire insulation paint layer, which is described below: The flat copper wire with insulating varnish (Fig. 1) is 6.2 mm wide and 3.2 mm thick. After stripping the insulating lacquer layer, the bare conductor has a width of 6 mm, a thickness of 3 mm, and a length of 5 to 12 mm. Wire specifications vary depending on the specifications of the electrical components. The structure of the cutting machine is shown in Fig. 2, which is composed of a shield 3, end mills 4 and 6, an adjustment sleeve 5, a clamp 10, and a base 11. Working principle: The motor 1 rotates and drives the release of two end mills. When the milling cutter cuts into the insulating lacquer layer of the wire 9, the wire 9 is fed axially, and the insulating layer is continuously cut until the desired length is reached. Adjusting sleeve 5 is used to change the ends of the flat wire
Trunnion Ball Valve,Floating Ball Valve for water tank,Automatic Water Level Control Valve,1/2 Inch Floating Ball Valve
Yuyao Gaobao Sanitary Ware Factory , https://www.gurberry.com