Community swing gate and function features of site swing gate

Swing gate equipment installation: ready to install equipment tools, and inventory parts according to the packing list; clear system composition and work methods, the overall planning, ready to start the installation; after the installation of equipment, the base surface, the equipment arranged Well; after setting the hole position, drill a hole and embed M12 anchor bolts or expansion bolts; use strong 3/4′′ PVC line pipe for the strong electric cable and the weak electric cable, and bury it in the corresponding cement. Position; Each chassis will be moved to the corresponding installation position, and the anchor bolts will be aligned one by one; check the system composition and work methods are correct, check the correctness, and then proceed to the next step; open the door of the chassis and select one of the devices As a reference (select one as a reference), align the socket bolt holes with the corresponding anchor bolts and tighten the nuts first; open the adjacent cabinet door and align the socket bolt holes with the anchor bolts. And align the predetermined reference equipment, pre-tighten the nut; if there are more than one need to be installed and so on; refer to the wiring diagram, connect the power line and control line, and connect the system protection ground wire; wait for the status check and function debugging qualified After that, again Tighten the groundnuts.

Intelligent swing gate system working principle:

1) Turn on the power and the system will enter the working state after 3 seconds.

2) When the card reader reads a valid card, the beeper will emit a pleasant sound, prompting the pedestrian to read the card successfully; at the same time, the information read from the card will be judged and processed, and an application pass signal will be sent to the main control board. ;

3) The main control board receives the signals of the card reader and infrared sensor, and after comprehensive processing, it sends an effective control signal to the direction indicator and the motor, so that the direction indicator turns to the green arrow access flag, and the gate sends out the setting. Voice, the main control board controls the motor running, the limit switch controls the motor rotation angle, the gate opens, and allows pedestrians to pass;

4) After the pedestrian indicates the passage of the direction according to the direction indicator, the infrared sensor senses the whole course of the pedestrian passing through the channel, and continuously sends a signal to the main control board until the pedestrian has completely passed the passage;

5) If a pedestrian forgets to read a card or read an invalid card to enter the channel, the system will prohibit pedestrians from passing, and will issue a voice alarm (illegal entry, please swipe) until the pedestrian exits the channel before the alarm is released; read the valid card again. Allow to pass;

The main technical parameters of the swing gate:

1) Power supply voltage: AC220±10% V, 50HZ2)

Drive motor: DC motor 24V/40W3)

Working environment temperature: -15OC - 60 OC4)

Relative humidity: Relative humidity ≤90%, non-condensing 5)

Input interface: 12V level signal or 12V pulse signal driving current with pulse width >100ms >10mA6)

Communication interface: RS232 communication, 7) Communication distance: ≤ 10m 8)

Channel width: wing gate 600mm swing gate length 600-900MM9)

Travel speed: 30 people/minute (normally open mode), 20 people/minute (normally closed mode) 10)

Gate opening and closing time: Wing gate 0.8 seconds, swing gate 1-2 seconds 11) Product model: DAIC-TD-BZ force field swing gate function

Swing gate function features:

1) It has zero self-check function, which is convenient for user maintenance and use;

2) illegal entry into the alarm prompt function;

3) Anti-knocking function, when no opening signal is received, the telescopic baffle (swing arm) is automatically locked;

4) Infrared/mechanical double anti-clamping function, the motor will automatically stop working within a specified time when the resistance of the retractable baffle (swing arm) is reset, and the force is very small, and an alarm signal is issued at the same time;

5) With automatic reset function, after the pedestrian reads the valid card, if the system does not pass within the specified time, the system will automatically cancel the pedestrian's access permission;

6) The unified standard external electrical interface can be connected with a variety of readers, and can be remotely controlled and managed through a management computer;

7) The entire system runs smoothly and with little noise;

8) You can use other smart systems such as ladder control, access control, parking, consumption, attendance, and patrol.

The function and characteristics of the swing gate swing gate at the construction site are as follows

, 1. All 304 stainless steel material, based on international norms of moisture, dust, waterproof design;

2. Based on the standardized design of the cabinet, the laser cutting, opening, a molding technology, mechanical drawing technology, modular docking, easy loading and unloading, high degree of exchange;

3 whole body stainless steel box thickness 1.5mm;

4. The pendulum rod is made of pure stainless steel/acrylic material/tempered glass;

5. The swing rod can be equipped with a sheath to prevent children and pedestrians from colliding and causing bodily harm;

6. The pendulum rod is free to switch off and reset automatically after power on;

7. Excessive people do not rebound, stability, and at the same time can provide information through the collapse of personnel, completely to one person and one line;

8. Humanized status identification to identify the current equipment operating status;

9. The use of standard electrical interface, can easily magnetic stripe cards, barcode cards, ID cards, IC cards, ID cards and other readers integrated in the device;

10. In place locking function, external force can not change its position;

The application field of the swing gate The application field of the swing gate is suitable for parks, stations, exhibition halls, gymnasiums and other occasions with high traffic. Wing gates have functions such as counting, attendance, and current limiting, and can be used in conjunction with ticketing systems, e-ticketing systems, scenic area ticketing systems, playground ticketing systems, gym ticketing systems, and theater ticketing systems to implement ticketing, ticket checking, ticket checking, ticket recycling, etc. Management functions; typical applications: office space: business buildings, government agencies, etc., science and education institutions: institutions, research institutes, libraries, etc., business services: supermarkets, shopping malls, hotels, clubs, banks, etc., leisure places:

Parks, scenic spots, playgrounds, etc. Transportation sites: bus stations, high-speed railway stations, railway stations, airports, etc. Swing gate

Features

The function of the swing gate swing gate:

1. All 304 stainless steel material, designed according to the international norms of moisture, dust, and waterproof;

2. Based on the standardized design of the cabinet, the laser cutting, opening, a molding technology, mechanical drawing technology, modular docking, easy loading and unloading, high degree of exchange;

3. Whole body stainless steel box thickness 1.5mm; 4. Pendulum rod made of pure stainless steel / acrylic material / tempered glass;

5. The swing rod can be equipped with a sheath to prevent children and pedestrians from colliding and causing bodily harm;

6. The pendulum rod is free to switch off and reset automatically after power on;

7. Excessive people do not rebound, stability, and at the same time can provide information through the collapse of personnel, completely to one person and one line;

8. Humanized status identification to identify the current equipment operating status;

9. The use of standard electrical interface, can easily magnetic stripe cards, barcode cards, ID cards, IC cards, ID cards and other readers integrated in the device;

10. In place locking function, external force can not change its position.

characteristic

Swing gate custom features: material, surface treatment and appearance style size integrated access control attendance consumption smart card management system integrated IC card/ID card/CPU card/fingerprint machine/face recognition

Main Meter Verification/Vehicular Recognition, etc. Mainstream Verification Equipment Integration Ticketing System (Including Barcode Scanning Technology/Export Card/Multi-terminal Verification Equipment) Integrated Image Capture System Integrated Temperature Control System Installation Remote Control Press

Button Mount LED Counter (Optional Internal or External) Installation Pendulum Cold Light Device/Acrylic LOGO Printed Waterproof and Dustproof Design

Swing gate function description:

1. All 304 stainless steel material, designed according to the international norms of moisture, dust, and waterproof;

2. Based on the standardized design of the cabinet, the laser cutting, opening, a molding technology, mechanical drawing technology, modular docking, easy loading and unloading, high degree of exchange;

3 whole body stainless steel box thickness 1.5mm;

4. The pendulum rod is made of pure stainless steel/acrylic material/tempered glass;

5. The swing rod can be equipped with a sheath to prevent children and pedestrians from colliding and causing bodily harm;

6. The pendulum rod is free to switch off and reset automatically after power on;

7. Excessive people do not rebound, stability, and at the same time can provide information through the collapse of personnel, completely to one person and one line;

8. Humanized status identification to identify the current equipment operating status;

9. Readable magnetic stripe card, barcode card, ID card, IC card, CPU card, etc.;

10. Smart card, ladder control, access control, attendance, parking lot, consumption, patrol etc.

Swing gate technical parameters

1. Equipment Model: DAIC-TD-BZ

2. Swing gate main board is a visual operation mode (operating according to actual needs), the size can be customized

3. Swing gate main board provides Chinese/English menu operation

4. Swing gate motherboard comes with electromagnet test function

5. Swing gate motherboard comes with high-definition audio decoding chip, can read and write / erase software at any time intelligent synthesis of voice

6. Provide the communication protocol of the swing gate main board 485, and remotely open the terminal program

7. Litian smart card, ladder control, access control, parking lot, attendance, consumption, etc.

Swing gate device operating instructions:

1 Before the equipment is put into use, it must be debugged through function, and it can be put into use after normal debugging;

2 It is forbidden to station people in the channel when the device is powered on;

When 3 pedestrians read the cartoon line, the sign of the direction indicator did not turn green, and access to the channel was forbidden;

When 4 pedestrians pass the passage, do not stay in the middle of the passage for a long time;

5 When passing through the gate, do not be crowded and keep a certain distance between people.

6 It is strictly forbidden to read the card and pass through the gateway quickly. 7 It is recommended to mark the passage notice of the machine at a conspicuous place in the work of the equipment to guide the passers through safe passages in order;

8 When the equipment is not working, it should be properly managed. It is forbidden to knock and shake the equipment.

9 When the device is closed, it is forbidden to forcefully push or pull the gate;

Swing gate function and technical parameters briefly introduce

Swing Gate/Wing Gate Function

1) It has a self-reported fault notification function to facilitate user's use and maintenance;

2) With traffic indication and channel indication;

3) Has a normally open button function;

4) It has the function of automatically opening the power-off swing door and automatically closing the power when it is powered on;

5) With line self-test function;

6) Has an illegal incoming alarm function;

7) Triple anti-pinch protection

8) Access mode can be adjusted;

9) The time and mode of closing can be arbitrarily adjusted;

10) Smart card with Li Tin, parking lot, access control, consumption, etc.

Swing gate technical parameters

1) Power supply: AC220/50HZ; 2)

Working environment temperature: -15 degrees - +70 degrees;

3) Relative humidity: <95% No condensation;

4) Swinging time: about 2S;

5) Communication interface: RS485 optional TCP/IP;