Fixed laying method: Fix the keel on the ground with expansion screws, use nylon material for expansion expansion (good anti-aging), iron expansion tube should be painted with anti-rust paint, then lay anti-corrosion wood; activity laying method: a The stainless steel Phillips screw is connected with the keel on the front side of the anti-corrosion wood; b The keel is fixed on the opposite side of the anti-corrosion wood with screws, and several pieces are assembled into one piece, which does not damage the ground structure, but also can be freely disassembled and cleaned; c suspension laying method, keel in Floor leveling can be connected to a frame/trail frame structure and then preserved wood.
Treatment of wood structure base layer: The air circulation between the anti-corrosion wood and the ground should be fully maintained during the design and construction, which can prolong the life of the wood structure base layer more effectively.
When making and installing anti-corrosion wood, a gap of 0.2-1CM should be left between the anti-corrosion woods. (Depending on the moisture content of the wood, the gap size should be determined. When the moisture content of the wood exceeds 30%, it should not exceed 0.8CM.) It can avoid water accumulation and anti-corrosion in rainy days. Expansion of wood;
A square column with a thickness greater than 50 mm or greater than 90 mm can be opened at the back to reduce cracking.
The hardware is applied in stainless steel, hot-dip galvanized or copper (mainly to avoid rust corrosion in the future and affect the connection fastness). Please pre-drill when connecting and installing to avoid cracking of the anti-corrosion wood.
Whenever possible, the existing size and shape should be used. The damaged parts should be coated with preservatives and outdoor protective coatings; since the anti-corrosion wood itself is a semi-finished product, the rough part can be reduced to 20% or less after the paving, and then sanded again. If you want to have better results, you can also apply outdoor protective coating after the surface is cleaned (if the color protective coating should be fully mixed). In case of rainy weather, it is best to cover it with plastic cloth first, and then brush the outdoor protective paint after the weather. Note: Rainwater should be avoided within 24 hours after painting
After the surface user protective coating or oil-based coating is finished (just one time), in order to achieve the best effect, people are prevented from moving or moving heavy objects within 48 hours, so as not to damage the protective film formed on the anti-corrosion wood surface layer. If you want to achieve better anti-dirty effect, do two special outdoor varnish treatments when necessary.
Due to the special use of the outdoor environment, the wood will be cracked, slightly deformed, and normal, and does not affect its anti-corrosion performance and structural strength.
Generally, the outdoor wood protective coating is permeable. A protective film is formed on the wood fiber, which can effectively prevent the water from eroding the wood. The cleaning can be cleaned with a general detergent, and the tool can be brushed.
1 year to 1.5 years to do a maintenance; special wood water-based paint or oil-based paint can be specially reminded: workers should wash their hands before eating. Avoid cleaning with other clothes when cleaning your overalls.
Strip clean disc is a new kind of Nylon fiber abrasive tools, can be the best substitute for traditional abrasive tools such as shutters and wire brushes.It is based on high-strength & wear-resistant fiber mesh, and the resin elastomer and nylon fiber and emery are bonded together by special process.
high-quality emery through a special process to form a high strength, high wear resistant, honeycomb shaped grinding wheel
solder joints, rust, sealant, scale, oxidation and other surface contaminants. Poly strip disc wheel an ideal tool for surface treatment such as paint, rust, and scale removal
wear resistance, strong water resistance, strong plasticity and good softness. Dirt will not block the fine seams of the grinding
surface, no rust, no fall off, low grinding sound and less dust
The strip clean disc network structure has the following characteristics:
1. Does not damage the surface of the object
2. The grinding force is uniform, and the grinding effect is uniform
3. Abrasion resistance, strong water resistance
4. Strong plasticity, good softness, suitable for various shapes of objects to be ground.
5. The dirt does not block the surface of the abrasive tool, there is less shedding, less noise, and less dust.
We distributes and wholesales various brands of Bonded Abrasives , Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Clean And Strip Disc,Shaft Flap Wheel,Shank Mounted Flap Wheel,Keying Flap Wheel With Shaft
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.abrasive-jd.com