ZCQ self-priming magnetic pump with a compact, beautiful appearance, small size, low noise, reliable operation, easy to use and maintenance features in the use of this type of pump should pay attention to those issues in the process. ZCQ self-priming magnetic pump precautions 1. Self-priming pump bearing cooling and lubrication is transported by the medium, it is absolutely prohibited air operation, while avoiding the power outage after the restart caused by space-time planted. 2, was transported medium, if it contains solid particles, the pump inlet to add filter: If containing ferromagnetic particles, the need to add magnetic filter. 3, the pump should be used in the ambient temperature should be less than 40 ℃, motor temperature rise must not exceed 75 ℃. 4, the medium being transported and its temperature should be within the allowable range of the pump (see attached table) 4, the temperature of the metal pump <100 ℃; the proportion of the medium being conveyed ≦ 1.3; Will affect the technical performance .5, for the transfer fluid is easy to precipitate crystallization of the shield, after use should be promptly cleaned, drain the pump effusion .6, self-priming pump operation 500 hours, Of the wear and tear, if the bearing and sleeve clearance greater than 0.5 ~ 1mm, impeller axial movement of 1.5 ~ 2mm, should replace the bearing and axial moving ring.Extended reading: China Construction Water Exhibition Industry leaders in Guangzhou Central Boiler Pump manufacturers Ranking Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)
Micro diaphragm pump,industrial pump,liquid transfer pump,diaphragm water pump,Gas diaphragm pump
Changzhou Yuanwang Fluid Technology Co., Ltd. , https://www.ywfluid.com