Lonely in the autumn, I saw that the winter steps were near, and some of the questions about the windows were growing. Choosing good profiles, glass, and hardware does not mean that you can enjoy good insulation and sound insulation because you have to install it. Due to the uneven quality of service provided by merchants and the fact that some workers are not operating in a standard manner, owners at some key nodes need to be careful to avoid inadvertently affecting the quality of windows during use.
Creation of doors and windows and sun room    Dream open windows and sun room
At the time of installation, the industry pays special attention to the following aspects.
1. Is the window frame erected?
When the worker puts the window frame on the opening at the installation site, he should flatten the window frame, and measure the horizontal, vertical, and diagonal lines of the window frame with tools such as a ruler, a ruler, and a hammer to confirm that the frame is placed properly. The next step is fixed.
2. Do not tighten the bolt once
When installing, hit the expansion bolts or tabs around the windows. During this process, some workers like to fasten the fasteners such as the expansion bolts one by one. This will deform the already adjusted window frames. Renovation of the first network suggested that the correct approach is to tighten the expansion bolt to be symmetrically screwed, but do not tighten it once, this will ensure that the adjusted window frame evenly without deformation.
3, check the window security
After the window frame is connected to the window opening, check whether the window frame is installed again before installing the glass. If the windows are not installed properly, the performance of the windows will be affected.
4, inside and outside the sealant must play
For the already fixed windows, the next step is to fight styrofoam and sealant. Styrofoam is used to fill the gap between the window frame and the wall, it can not be exposed for a long time, otherwise it will become aging "crisp." So be sure to use sealant on the inside and outside of the window frame. The above points are due to some workers will ignore, the owner needs to stare and remind.
Door purchase construction acceptance inspection windows, doors, windows, glass doors
Sand Texture Powder Coating is the thermoset Powder Coatings with sandpaper like finish, which is highly decorative finishes with fine or roughened sand surfaces, available in any of powder types e.g. epoxy, polyester and epoxy-polyester. In certain applications this finish is chosen because of its ability to hide substrate defects. For more details please refer to official website ChinaPowderCoating.com .
Silver Grey Hybrid Powder Coating,Silver Texture Powder Coating,Sand Texture Powder Coating,Texture Powder Coating
Jinhu Color Powder Coating Co.,Ltd , http://www.powdercoatingscolor.com