Speaking of the bath towel shelf, everyone is familiar with it. It is one of the essential hardware pendants in the bathroom, and a good towel rack should not only pay attention to the color and function, but also pay attention to the installation position so that it can be used conveniently in the future. What is the location of the bath towel rack ? Here we will explain in detail: Where is the towel rack installed and how does the towel rack fit? Hopefully it will give you some help and inspiration.
Where is the towel rail installed?
1. Hold the towel 180 centimeters away from the floor, place a bath towel on the top, and hang the towel on the bottom.
2. If it is a double-barbed towel rack, it should be installed on the empty wall in the center of the toilet, preferably 1.6 meters from the floor.
3. If it is a single-tube towel rack, it should be installed on the wall in the center of the toilet, preferably 1.5 meters from the ground.
4, bath towel ring height 0.9m-1.4m.
5, bath towel pole height 1.1m-1.2m.
Towel rack mounting height:
Under normal circumstances, the height of the wash basin is 0.8m above ground, which is not only good-looking, but also convenient for daily use.
Towel rack how to install:
1, in the installation, the surface of water, grease, stains clean, the towel rack fixed on the suction cup.
2. Put the stainless steel pipe in the bracket.
3. Fix the adsorber in position, squeeze out the air in the suction cup, and turn the button clockwise. If you want to remove it, just turn the knob counterclockwise.
4, after completion to see if it is safe, and then put the goods up.
Towel rack installation notes:
1. The towel rack should be installed above the bathtub and opposite the faucet, 1600 mm above the floor height.
2, towel racks should be fixed with plastic tubes and screws, this is not only simple, but also will not rust, easy maintenance.
3, the color of the towel rack and the faucet want to match, if the faucet is silver-white, that towel rack must also be silver-white, or no border, so that coordination, will not be confused feeling.
4. Before installation, first hold the end of the hanging rod by hand and wipe the hanging rod with a towel. If the quality is poor, it will touch the small burr or paint off. In addition, pay attention to the plating and coating quality of the shelf base to see if there is any flaws.
5, to see if the screws on the base are slippery, rotten teeth, so as not to affect future use.
6, in the installation of towel rack, we must determine the height according to their height, so as not to affect the future use.
Article Summary: towel rack installed in any position and knowledge of how to install a towel rack on the introduction here, when you install towel racks, in addition to pay attention to the location, pay attention to height, the installation method and installation considerations, so as to avoid Follow-up troubles.
Cat climbing tree tower,Big Climbing Cat Tree,Cat climbing tree for indoor cats,Cat climbing tree,Cat Tree Furniture
Dongguan Maimeng Cultural Communication Co., LTD , https://www.icollectoys.com