For various reasons, it is difficult for the stone products supplied by the supplier to the demander to achieve perfect results and decorative quality, which leads to disputes between the supply and demand sides, and even some appeals to the court. There are many reasons. One of the reasons that is often overlooked is that the supplier does not specify a number for the stone product during production and processing. What are the important functions of stone product number in stone production and processing, decoration and decoration?
First, it is easy to identify and find a building. The stone decoration is as small as one or two thousand square meters, and the other is up to 10,000 square meters. The size and specifications are varied, and the number is as many as tens of thousands or even hundreds of thousands. There are many floors on the floor of the building. There are many different rooms and halls on the same floor. The same room and hall have different facades and planes. If you don't give these stone products a clear number, then you need to find the stone products corresponding to the decoration parts after you get these stone products. It is undoubtedly the needle in the sea. The difficulty is quite big. Moreover, due to the limitation of the space of the site, it is impossible to disassemble each box of goods. Each stone product is numbered, saving a lot of trouble for the buyer.
In the processing, the stone product number also brings a lot of convenience to each process, and it is very easy to find the products that you want to process. Now, a larger stone factory cuts out more than 1,000 square meters of specifications per day, with a number of thousands or even tens of thousands. If each product is not clearly numbered, it is a tricky task for the processor of the next process and the inspector of the final product to find the product they need.
Second, it is conducive to the installation and construction of the stone number can make it convenient for the constructor to put these stone products on the corresponding parts.
The number of stone products not only reflects that it is a kind of identification, but also reflects the order and direction of construction. When a board is numbered, it indicates that the board is installed in this position and cannot be installed in the position. Otherwise, it will lead to the failure of the entire installation, and will not achieve the predetermined decorative effect.
For the stone products such as door sleeves, lines, cylindrical bases, spiral staircases, etc., the manufacturers have tried to make good decorative effects after the installation of these products, and they are tried and repaired in the factory, and given in the order of splicing. The number. If the decoration company is not strictly installed according to this number during installation, the installation quality can be imagined.
Third, for the pursuit of traces, the color of the stone has a good decorative effect
As is well known, stone is a natural product, so there is inevitably a difference in color difference and pattern size. How to ensure that these products with different color difference and pattern size have good effect and beautiful feeling after installation? The number of the stone processing process can solve this problem. The chase is a large board after cutting, the cut sheets are put together, and the stitched lines are still connected end to end, which is basically the same as the pattern before cutting. This is a good way to solve the effect of stone color difference on the installation effect. This processing technique is often used in stone production. In the process of processing, the color transition method is adopted according to the floor plan. The chase number is the specific embodiment of solving the chromatic aberration problem by using this principle. Use the chase number method to gradually change the color difference from deep to light or from shallow to deep to ensure the transition of chromatic aberration.
In order to solve problems of Chemical Dosing System in water supply plant,such as poor mixing and flocculation effect,low automation and large chemical dosage,the technical reconstruction of chemical dosing system was performed,and polymeric ferric sulfate was replaced by polymeric aluminum ferric chloride.The automation level is improved,the chemical consumption is reduced by 22%,the chemical cost of 340 000 yuan is saved annually,and the labor intensity is reduced.
Chemical Dosing System For Water Treatment
Acid Dosing Device, Chlorine Dioxide Dosing System, Flocculant Dosing System, Chemical Dosing System
Nanjing Ligong Shuifu Environmental Protection Technology Co.,Ltd. , http://www.watermanclo2.com