In the summer, due to the air is too dry or too humid, the extreme weather phenomenon has not always been considered a good season for home improvement. Many people think that spring and autumn are the golden season of decoration. In fact, in the summer decoration, as long as the problems should be handled well, according to the normal construction process and construction process, each work can also be done to satisfy you. engineering.
To reduce the loss of tiles and floors, we must grasp the entire process. As far as tiles are concerned, consumers are better off purchasing qualified products and agreeing with the merchants on terms of replacement, such as whether they can be replenished, returned, replaced, claim conditions and responsibilities, etc., and know how to deal with them if they have problems; Also have to consider, ordinary 10-30 square meters of room, generally paved 600 × 600 mm tiles on the line, do not choose too large tiles, or loss more. In order to avoid the loss of ceramic tiles, it is necessary to supervise the work. 'When you find that the worker has cut the tile and throw it away, or if it is broken, you have to ask clearly to prevent the worker from wasting it.
As for the floor, the owner must first measure the area of ​​the room before buying the floor, and know how many floors to buy. If the room area is 20.5 square meters, then you need to add 5% more surplus. When buying the floor, buy a floor that is slightly larger than the area of ​​20.5×(1+5%)21.525 square meters. If the floor area is overrun, ask Know why there are so many losses. If the owner is worried that the manufacturer will falsify on the floor or 'lack of short two', you can pay attention to the inspection when ordering. If you buy a lot of bags, how many pieces of floor each package, you can not measure it. Whether the floor area, length and width are standard sizes.
The owner can also supervise the work. When the paving worker saws the floor, he asks why the saw is used. Where is it used? If it is normal cutting, the worker can explain it clearly; it can also prevent the paving worker from sawing the floor. In addition, consumption You can count the floor, figure out how many pieces you bought, how many pieces you have laid, how much waste you have, and calculate the loss rate.
AASHTO M247 Glass Beads,we mainly manufactures Drop-on Glass Beads, prermix Glass Beads ,Blasting Glass Beads, Grinding Glass Beads and other reflective glass beads. We can produce micro glass beads for road marking based on the standard of EN1423/1424, AASHTO M247, BS6088, JIS R3301,KS etc. these differents standards can meet different market for the road marking lines and traffic signs.
Reflective Standard Type 1 Glass Beads,AASHTO Tpye 1, Glass Beads, Sand like texture. Same glass beads used on interstate, highway and local traffic lines.Makes paint reflective. Beads are sprinkled on top of the wet while it is still wet at a ratio of 6 pound beads per gallon of paint. roundness >= 80%. Refractive index is >= 1.51.
Retroreflective highway signs and lane markers use special kinds of paints and materials. Most retroreflective paints and other pavement marking materials (PMM) contain many thousands of glass beads per square foot that are bonded to the highway with a strong binder. Instead of scattering light, as normal paints do, retroreflective paints containing glass beads turn the light around and send it back in the direction of your headlights.
AASHTO M247 Glass Beads,AASHTO M247 Reflective Traffic Glass Beads,AASHTO M247 Road Marking Glass Beads,AASHTO M247 Micro Glass Beads
YONGQING BAILUYUAN GLASS PRODUCTS CO.,LTD , https://www.blyglassbeads.com