Magnetic drills are drilling rigs that are attached to steel structures to make holes. The emergence of magnetic drill is an urgent need for people in field practice. Magnetic drills are used in the fields of steel structures, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power generation, oil rigs, power construction, and railway manufacturing. Nowadays, there are many companies producing magnetic drills. The prices of magnetic drills produced by different manufacturers are also different. Let's take a closer look at it!
Â
　　 Magnetic drill price
Â
RJ multifunctional magnetic drill speed regulation positive and negative magnetic seat drill tapping machine table drill hole drilling iron suction drilling machine 23A fixed speed section: ï¿¥ 3120.00
Dongcheng Magnetic Drill J1C-FF-23S Magnetic Drilling Machine Multifunctional Iron-absorption Drill Magnet Drill Magnetic Turntable Drill Power Tool J1C-FF-23S: ¥ 1569.00
DH speed leopard magnetic drill multifunctional industrial grade portable small electromagnet magnetic suction drill bench drill hollow magnetic seat bit PR-8023E speed regulation: ï¿¥ 2760.00
CHTOOLS DeXi series DX-35 multi-function magnetic drill iron suction core drill core drilling table drill hollow drill: ¥ 2989.00
Anjieshun RJ-32 magnetic drill multi-function magnetic seat drill iron suction drill adjustable speed forward and reverse tapping machine desktop drilling machine RJ-32: ï¿¥ 1770.00
Lang Yi magnetic seat drill multi-function magnetic drill twist drill hollow drill speed regulation positive and negative drilling core drill industrial grade magnetic suction drill multi-function steel drilling machine 220v380v hole drilling machine JICD-16C: ï¿¥ 1380.00
Note: The above prices are all from the Internet, for reference only.
Â
　　 Installation and maintenance of magnetic drill
Â
1. Install the drill bit: When installing the drill bit and the drill bit with a keyless converter, be sure to ensure that the drill bit is installed correctly. Use your left hand to turn the quick-change drill bit counterclockwise to the end, and the right hand to align the drill bit vertically The hole of the drill bit is pushed up to the end, and then the right hand gently rotates the drill bit until it hears a "click". It proves that the drill bit has been installed correctly. If you need to remove the drill bit, use your left hand to quickly change the drill bit Screw it counterclockwise to the end and pull the drill straight down with your right hand.
2. Tightening adjustment of the feed: After using it for a period of time, if it is found that the feed stroke of the drill is not directly controlled by the handle, please open the iron cover and use an allen wrench to tighten the inner hex nut of the handle.
3. Overload: If the machine is overloaded for more than 10-16 seconds, the machine will automatically shut down. At this time, the motor switch can be turned off first, and then the motor switch can be turned on again to work normally. Similarly, if the power is interrupted during the use of the machine, turn off the motor switch after the call, and turn on the motor switch to resume normal operation.
4. Feed: Please slow down when drilling and feeding, and then increase the feed speed after the drill bit is completely eaten. It is best not to turn off the motor during drilling. If the drill bit is blocked in the hole, turn off the motor and slowly unscrew the drill bit with a wrench.
5. Use of coolant: When drilling holes in a flat surface, use coolant to cool the drill bit. Do not use any coolant when drilling on the top or side holes to prevent the coolant from flowing into the hollow drill and causing the machine to short-circuit.
The above is to introduce to friends about the price of magnetic drill and the installation and maintenance of magnetic drill. Accuracy must be required in the use of magnetic drills. We ordinary operators should understand his basic principles, but the installation and maintenance of magnetic drills is best carried out by professionals.
Auto disable syringe
Dongguan Maimeng Culture and Creative Co. Ltd , https://www.factorydirectmask.com