Low noise bearing selection tips

Source: Bearing network time: 2017-12-19

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

1. Rolling bearings with low noise requirements are: in the standard bearings produced in China; some single-row radial ball bearings and short cylindrical roller bearings have low noise types for power supply bearings. The ball bearings are from the inner diameter Ï†2. 5mm to There are several types of Ï†60mm with three suffixes of Zl, Z2 and Z3; there are three different low noise requirements; the eight types of roller bearings from N309 to N322 also have low noise specifications. These bearings are perfectly suited for use in other machines with low noise requirements; and they are inexpensive; they meet the requirements in terms of type and size; try to use these two types of low noise bearings.
2. Use bearings with relatively low noise: When the above two types of low-noise bearings cannot be used; bearings with relatively small noise can be selected. The detailed comparison is as follows:
1) The noise of the ball bearing is lower than that of the roller bearing; the (collision) noise of the bearing with less sliding is lower than that of the relatively sliding bearing, and the number of balls is large; the outer ring is thick; the noise is also higher.
2) The noise of the solid cage bearing is relatively lower than that of the bearing using the stamping cage.
3) The noise of the plastic cage bearing is lower than that of the bearings of the above two cages.
4) Bearings with high precision; especially the bearings with higher precision of the rolling body; the noise is relatively better than the noise of low-precision bearings.
5) The noise of small bearings is relatively small compared to the noise of large bearings.

Recommend to friends comments close window

Bearing related knowledge

NSK imported bearings super-resistant roll bearing features Japan Seiko NSK imported bearings rear code to clarify the basic layout of the rolling bearing and the effect of each part of the rolling bearing type selection Japan NSK developed low torque grease sealed bearings

This article links to http://
Please indicate China Bearing Network http://

Previous:Analysis of the importance of FAG bearing data selection Next: How to clear the motor shaft

Silicon Nitride Ceramic Plunger

The high wear resistance of high-pressure ceramic plungers is much higher than that of traditional metal plungers. It is an ideal substitute for metal plungers and greatly extends the service life of related components. This is also related to its unique manufacturing process. The high-pressure ceramic plunger working surface adopts a micro-porous structure obtained by a unique processing method. This form has self-lubricating effect, which changes the mechanism of sliding friction and lubrication of the conventional plunger pump.The inner surface of the high-pressure ceramic plunger adopts a fluid structure without dead angles and grooves; and the inner cavity surface is matched with the surface of the plunger, and is also processed to the mirror surface by an advanced high-precision inner and outer cylindrical grinding machine, and the outer surface is vibrated and polished for convenient cleaning. ,disinfection.

Silicon Nitride Ceramic Plunger,Customized Zirconia Ceramic Plunger ,Ceramic Plunger,Stainless Steel Zirconia Ceramic Plunger

Dongguan Haikun New Material Co., Ltd. , https://www.hkceram.com