Infrared lamp installation precautions 1. Debugging infrared lamps must be performed at night. The infrared beam illumination position is adjusted at night through an imaging device such as a monitor. And can effectively adjust the lens aperture settings.
2. The infrared light can't directly face the camera. The infrared light seen by the camera is the same as the sunlight that humans see.
3. The infrared lamp is not necessarily installed in the same position as the camera. If the camera is far away from the illuminated object, you may consider installing the infrared lamp between the two. The best way to install in the same location is to install the infrared lamp and the camera in an overlapping manner.
4. The installation height of the infrared lamp should not exceed 4 meters, too high will affect the reflectivity of light. The angle should be from the top down angle of 20 degrees, and the elevation angle is too large to reflect.
5. The working indicator of the infrared lamp must be guaranteed (see the product specification for details). For example, the power supply of the infrared lamp must be higher than the operating power of the infrared lamp itself.
6. The user must first read the instruction manual carefully when using the infrared light, especially the precautions to ensure personal safety. Check whether the supporting aspects mentioned in the previous section meet the requirements. Whether the influencing factors that should be taken into consideration should be taken into consideration, if not meet the requirements, the equipment used can be adjusted in time.
358 Security Fence Introduction:
2. The infrared light can't directly face the camera. The infrared light seen by the camera is the same as the sunlight that humans see.
3. The infrared lamp is not necessarily installed in the same position as the camera. If the camera is far away from the illuminated object, you may consider installing the infrared lamp between the two. The best way to install in the same location is to install the infrared lamp and the camera in an overlapping manner.
4. The installation height of the infrared lamp should not exceed 4 meters, too high will affect the reflectivity of light. The angle should be from the top down angle of 20 degrees, and the elevation angle is too large to reflect.
5. The working indicator of the infrared lamp must be guaranteed (see the product specification for details). For example, the power supply of the infrared lamp must be higher than the operating power of the infrared lamp itself.
6. The user must first read the instruction manual carefully when using the infrared light, especially the precautions to ensure personal safety. Check whether the supporting aspects mentioned in the previous section meet the requirements. Whether the influencing factors that should be taken into consideration should be taken into consideration, if not meet the requirements, the equipment used can be adjusted in time.
358 Anti-Climb Security Fence
358 Security Fence Introduction:
- 358 Security Fence also called high security fence, anti-climb fence, prison fence.It is
extremely difficult to penetrate and difficult to attack using
conventional hand tools. It has the features of anti-climbing and
anti-cutting.
- 358 Security Fence is
wide used for Retail,industrial and commercial properties, schools,
public utilities,Military, airports, secure units and prison.
358 Anti-Climb Security Fence,Security 358 Fence Panel,358 Anti Climb Mesh Fence,358 Anti Cut Mesh Fence
HeBei Bosen Metal Products Co.,Ltd , https://www.hbbosenfence.com