1. Before using the repair strip or repair sheet, the surface of the damaged rubber transport belt should be roughened with a low-speed angle grinder or a rubber file.
2. Mix the SC2000 and the curing agent in a ratio of 100:4. The mixed SC2000 should be used within 2 hours.
3. Apply the mixed SC2000 to the rubber damaged surface with a brush. After the first layer is dried and not sticky (test by hand), apply a second layer.
4. While the second layer is applied on the rubber surface, the CN layer of the repair strip (repair sheet) is also painted.
(The patch and repair strip with CN layer only need to be painted once and mixed SC2000)
5. When the second layer is dry to a slight viscosity, the repair strip (patch) is applied to the repaired surface.
6. Pay attention to the extrusion of air bubbles when pasting the patch. You need to use a compaction roller to roll from the middle to the outside, and then use a rubber hammer to beat and firm.
7. Finally, along the edge of the patch, brush the SC2000 with a brush and cover the edges of the patch and patch.
8. After fully drying, drive after 2 hours.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
1. According to request it can do a single-stage and continuous cutting.
2. Operation of this machine is simple, reduced operational requirements of workers.
3. Machine with high degree automation, can achieve a continuous, intermittent feeding, effectively improve work efficiency;
4. Simple operation, flexible adjustment and stable operation.
5. Multi -purpose machine, can complete continuous feed and cutting length.
Angle Iron Root Cleaning Machine,Angle Bar Root Cleaning Machine,Angle Steel Machine,Heel Milling Machine for Angle Tower
Shandong EN FIN CNC Machinery Co., Ltd , https://www.sdfincncmachine.com