When dressing up the ground, besides laying the tiles, we must use a beautiful sewing product to make joints, so that the effect will be better. Then, how much more gaps in the US seam will be better to see ? And the construction process and precautions of the US grout. Here we take a look!
The United States to leave more gaps to see better :
The United States to seize the gaps to see how much better it? In fact, there are no uniform gaps, and there are no unified rules, according to the type of brick to decide, for example: Porcelain tiles to be small joints, the quality of the seams to be larger, if Living room tile to leave about 2mm seam, wall tiles to leave about 1-1.5mm, floor tiles to leave about 2-3mm, if the special specifications of the tiles will be left seam 3-5mm. However, these data can only be used as a reference. In particular, it is necessary to listen to the advice of the master of decoration so that it will not cause any trouble in the later period.
US grout construction process:
1. Prepare tools and bring your fingertips to avoid soiling your fingers.
2. Clean crevice stains with a utility knife or brush.
3. Apply textured paper on both sides of the gap.
4. Install the US sizing agent on the glue gun.
5, hold the glue gun, hit the US sizing agent.
6. Use a scraper to evenly scrape the US grout.
7. Use a sponge to clean the excess US sizing agent.
8, tear off the textured paper.
US grout construction notes:
1, in the construction, can not use too sharp objects to poke the gap, can not use strong acid and alkali items, otherwise it will destroy the effect of the US sizing agent.
2. If there is empty drum on the ground, you must first level or replace the new tile. You can use the US grout, because, when the floor is hollow, people will step on it and deform, beyond the tolerance of the US grout. It is easy to cause the United States grout to fall off.
3, in the construction, pay attention to the time, it is best before the furniture enters the market, so do not use to move the furniture back to the United States to bring destruction. In addition, the requirements for the construction of the US Grout are very high, and there must be no dust, water, oil, and other impurities during construction, otherwise it will affect the effect of the US Grout.
4, before use, it is necessary to use a caulking agent to the bottom, so after the formation of the ground, in the coating US agent, so that better.
5, it is a quick-drying product, so at most only 1250px at a time, we must use wet sponges to remove spilled products, otherwise it will get stuck on the tiles, that is to use tools to remove, there will be a small amount of residual When people step on, they will turn black, affecting the overall home improvement effect.
The article concludes: The gap between the US seam and the gaps in the gaps and the construction process and precautions are introduced here. The construction of the US grout is very simple, as long as the above steps are completed step by step, but before the construction Be sure to clean the slits so as not to affect the year of use.
Office Sofa,Office Couch,Office Sofa Set,Small Office Couch
QINGDAO SANJET NEW POWER MACHINERY CO., LTD. , https://www.sanjet.net