Digital push-pull gauges are precision measuring instruments. How to maintain the sensitivity of the digital push-pull gauges has become the focus of our topic today. What are the points we should do to better maintain the sensitivity of the digital push-pull force gauges ? , The following is a summary of the Shanghai Hengheng digital display force gauge Xiaobian:
Correctly maintain the sensitivity of the digital push-pull force gauge:
1. Do not use more than the maximum allowable torque, so as not to damage the sensitivity of the digital push-pull force meter;
2, do not use when charging, so as not to cause the instrument measurement accuracy;
3, do not hit or place a heavy object on the display panel 4, when not in use, should use the zero adjustment knob to make the instrument display in the "0000" position (ie display "0000") and turn off the power;
5, is very sensitive to environmental conditions, to avoid the use of force measuring instruments in the following places 6, there is splashing of water, oil or Other liquids and covered with aerosols with high pH;
7, there are dust, hot air filled, vibration place;
8, do not open the back cover to verify the various components, or for other reasons to do so;
9, do not loosen the screws fixing the test head, which will reduce the resolving power;
10, can not throw, fall, fall and collision, or rough use, the test will damage the sensitivity of the digital push-pull force meter;
11. Be careful not to damage the appearance when using it. Special probes, buttons and connecting cables are strictly prohibited from mechanical damage. Stop using immediately after damage. Especially during the work process, do not shut down at will and develop good habits. Turn off the power after completing various operations. This can extend the service life. After each use, the probe can be cleaned with a dry cloth or paper towel. In particular, the contraction pressure probe should be protected against moisture and should be placed on the probe holder. Then turn off the power supply of the host. 13. If the environment is not good, cover with cloth and wipe with a little alcohol to clean the probe and button. Take care that alcohol cannot be soaked in the probe. Affect the future use of the dynamometer 14, keep the outer surface of each part clean, regular cleaning with a piece of cloth dipped in cleaning liquid, be careful not to get the cleaning liquid into the chassis, wipe dry after cleaning to avoid condensation.
15, the monitor display can only be wiped with a dry cloth.
16. Do not remove the packaging handling equipment within 10 minutes after shutting down.
17. For a long period of time, do not use a digital push-pull force meter. Unplug the mains power supply. Put the probe and buttons into the accessory box.
Digital push-pull gauge picture
The reader reading this article also read: Manual Torque Wrench Torque Tester Torque Driver Digital Torque Tester Digital Pressure Gauge Cap Torque Tester Horizontal Tensile Tester Torque Tester Digital Torque Tester Digital Display Pull Force Tester
A7.Floor Standing Bathtub Faucet
kaiping aida sanitary ware technology co.,ltd , https://www.kpaidafaucets-jm.com