Some construction workers are not afraid of the owners to come on-site inspections. They feel that the owners do not understand anything, do not know well or do well, and do not know well. Therefore, as long as there is no inspection accompanied by supervision, all of them flickered without discussion. As the saying goes, the insiders are looking at the door and the amateurs are watching. However, what exactly do we look at in the decoration scene and how do we look at it to achieve a multiplier effect? Now, let the supervisor teach you what to look for at the end of the field, and let you say goodbye to it.
Grand Marshal Craftsman Square     Shuaibang Design
View one: waterproof engineering
For covert waterproof works, the most important thing is to do meticulous construction. First of all, before the renovation, the construction personnel must do a 24-hour water-retaining test. After confirming that there is no leakage, clean up the ground debris, remove the loose parts, and then use a cement mortar to smooth the uneven areas, and then the entire Flattened on the large surface. Closed water test can also play a role in distinguishing and determining the responsibility of the waterproofing project. There is a leakage phenomenon in the developer; there is no leakage after the renovation and there is leakage, and the responsibility is to decorate the public.
If the bathroom is waterproof, the water will splash on the adjacent wall when bathing. If there is no protection of the waterproof layer, the partition wall and the diagonal wall of the corner will become mildewed, so be sure to prepare the wall surface before laying the wall tiles. Waterproofing, in general, the walls are to be treated with a waterproof height of 30 centimeters, but the non-load-bearing lightweight walls should be waterproofed at least to 1.8 meters high. Special attention should be paid to the corners and strictly prevent the occurrence of drip leaks. In fact, most of the waterproof layer leaks are corners. Therefore, if these places are properly prepared, the possibility of leakage will be reduced.
View 2: wall and keel
If the wall and the keel violate the rules of operation, they will not be easily found. For example, due to the collapse of the ceiling as a whole or in part, the ceiling becomes a "top drop."
View three: Ceiling
The combination of the ceiling and the floor and the keel and the veneer is not good, or the load is too large, which can easily cause "falling off." According to the regulations, the ceiling keel shall not be twisted or deformed. The installed keel shall be firm and reliable. The horizontal deviation shall not exceed 5 mm; a chandelier or ceiling fan exceeding 3 kg in weight shall not be hung on the ceiling keel, but shall be separately provided. If the ceiling is made of gypsum board, the thickness should be about 9mm.
View 4: Fragment
1. Cold and hot water pipes are mixed with white water for cold water pipes, red water for hot water pipes, and cold water pipes and hot water pipes are mixed together. There are hidden dangers: the expansion and contraction rate of hot and cold water pipes is different. Due to thermal expansion and contraction, the cold water pipes burst and leak. Standard operation: distinguish hot and cold water pipes according to color and operate strictly.
2, the use of glue specification operation: At present on the market there is no natural pollution-free glue, the substitute is 108 glue. However, we must look for better brands and look for products with test reports.
3, the wire does not have a set of insulating tube in the construction of the wire directly buried in the wall, the wire is not covered with insulation tube, wire connector directly exposed. There are hidden dangers: This is very unsafe, and may cause short-circuit of the wires due to some reasons, such as the aging of the wires, resulting in wire breakage; at the same time, once the wire is broken, it cannot be changed at all, only the wall knocks on the ground. Standard operation: The wires must be laid with insulation sleeves on the outside, and the circuit joints should not be exposed on the outside. They should be installed in the line box. No joints are allowed between the distribution boxes.
4. It is arbitrarily dismantled and changed the waterway. If the owner does not understand the decoration, he misleads the owner to dismantle the waterway and waste money. There are hidden dangers: waste of money is only one aspect. Once it is not sealed or lacks pressure during the demolition of the waterway, it will lead to burst of water pipes. Normative operation: When the pipeline is changed, it will move and it must not be moved when it is not.
5, strong and weak electricity placed together with typical jerry cuts. Put strong electricity (such as lighting wires) and weak electricity (such as telephone lines and network cables) in a tube or box, and store less pipes, saving time and effort. There are hidden dangers: There will be interference when making a call or surfing the Internet. At the same time, too much threading in a pipe also creates a risk of fire. Normative operation: Strong and weak electricity should be routed separately. It is forbidden to share one pipe and one bottom box for strong and weak electricity.
6, the length is not enough no connection accessories due to the length of the insulation tube is not enough, here is exactly a turn, do not place the connection accessories, at the junction with the junction box to expose a section. There are hidden dangers: If you stay for a long time, it may cause leakage due to the aging of the line. Normal operation: There should be something connected between the nozzle and the junction box. 7, repeat the wiring a large number of repetitive wiring, multi-purpose materials, waste the owner's financial and material resources. There are hidden dangers: Once a problem arises in the line, it is difficult to detect in a layout like the "Tian Luo Di Network." Normative operations: Arranged closely, in the case of no more than 40% of the capacity of the pipe, the same trending line can be worn in a pipe. However, it is necessary to separate strong and weak electricity.
8. The typical brutal construction of the line pipe damaged by the subsequent project. After the pipeline was laid, it was slotted on the ground again and the pipeline was laid through. There are hidden dangers in the renovation: After you check in, you may find that there is no electricity in a room in your house. You can only detect all the lines in your home and re-thread them. Normative operation: The construction cannot be performed again in the place where the pipeline is laid. If it is damaged, it is forbidden to wire in the middle when changing lines. When the circuit load is large, the joint of the wire in the threading pipe is easily sparked and a fire occurs.
9, putty when the cement with a typical crude construction. On many construction sites, the mistakes of the construction team were well-known, and the horizontal slotting did not say that after the wiring of the line pipe was completed, the putty powder was used as cement. There are hidden dangers: The horizontal slotting during the decoration has destroyed the bearing weight of the entire building, and the original design's ability to resist earthquakes has decreased. Normative operation: The cement used to plug the trunk must be consistent with the cement of the original structure to ensure its strength.
10, wire regardless of the color of all lines with a color, for the sake of labor. There are hidden dangers: once the line is in trouble, the line of discordance is detected again.
JS Common Freakish Concealed Project Entrance Decoration Cement Decoration Design Lighting Room Ceiling Fan Lights Bathroom Tiles Bathroom Doors Bathroom Tiles Color Bathroom Ceiling Material Bathroom Ceilings Whole Bathroom Toilet Design Toilet Waterproof Toilet Leaking Tiles
The beveling machine is a special tool to chamfer the front end of the pipe or pipe fittings to obtain the angle of the surface . Beveling the pipe or Pipe Fitting for convenient to welding. The beveling angle is mainly 37.5 degree . application material, carbon steel , stainless steel ,alloy steel .
According to the work function , we have two type beveling machine :Single End Manual Beveling Machine and two side auto beveling machine .
Pipe Fitting Beveling Machine photo :
Beveling Machine
Beveling Machine,Pipe Fitting Beveling Machine,Automatic Beveling Machine,Elbow Beveling Machine
Dongguang Huawei Hydraulic Pipe Fitting Machinery Co., Ltd , http://www.pipefittingmachine.com