Do a good job of concealed acceptance. The concealed acceptance of the project mainly consists of the flat planing of the column foot, the flat topping of the bottom of the beef leg, the flattening of the stiffening plate at both ends of the crane beam, the flattening between the crane beam stiffener and the upper flange of the crane beam, and Sand blasting and manual electric rust removal. After derusting, it must be supervised and accepted to meet the design requirements of the derusting level before painting.
The painted film is painted with a film thickness gauge to measure its thickness. Carefully check the weld. For the first and second grade welds, ultrasonic flaw detection is carried out in accordance with the specifications. All unqualified welds are resolutely required to be reworked. For the friction surface of high-strength bolts, the anti-slip coefficient test must be performed. All steel components are marked before leaving the factory, and the factory certificate is filled out. After the supervision and inspection, they will enter the site in an orderly manner according to the site installation schedule. After entering the scene, there must be a special person to accept the inspection, make a record, and do not stack it at will.
The coal carrier activated carbon has well-developed pore structure, good adsorption property, high mechanical strength, easy to repeat regeneration, low cost, and so on, it is used for purifying the poisonous gases, treating the waste gas, purifying the industrial and domestic water, and recovering the solvent.
Use: Used in the treatment of waste gases containing sulfureted hydrogen, methyl merecaptan, sulfur dioxide, methyl sulfide, dimethyl sulphide etc.
Spec.:
|
Model NO.
|
Moisture(%)
|
Strength(%)
|
Carbon tetrachloride(%)
|
Packing density(g/L)
|
Load content(%)
|
H2S(g/cc)
|
Grain diameter(mm)
|
| TZK-3070 |
≤15
|
≥95
|
≥70
|
≤660
|
KOH 6.0-8.0
|
≥0.140
|
Φ3.0
|
| TZK-4070 |
≤15
|
≥95
|
≥70
|
≤650
|
KOH 6.0-8.0
|
≥0.140
|
Φ4.0
|
| TZK-6070 |
≤15
|
≥95
|
≥70
|
≤630
|
KOH 6.0-8.0
|
≥0.140
|
Φ6.0
|
| TPK-4×8 |
≤15
|
≥95
|
≥60
|
≤580
|
KOH 5.0-7.0
|
≥0.140
|
3.6-3.8
|
| TPN-4×8 |
≤15
|
≥95
|
≥60
|
≤580
|
KOH 5.0-7.0
|
≥0.140
|
3.6-3.8
|
| TZI-4070 |
≤15
|
≥95
|
≥70
|
≤650
|
KI 2.0-6.0
|
≥0.140
|
Φ4.0
|
| TZS-4060 |
≤15
|
≥95
|
≥60
|
530-560
|
S 10.0-12.0
|
-
|
Φ4.0
|
| TPP-30×60 |
≤15
|
≥95
|
≥60
|
-
|
H3PO4 5.0-15.0
|
-
|
30×60 meshes
|
Coal Carrier Activated Carbon
Coal Carrier Activated Carbon,Coal Activated Carbon For Catalyst Carrier ,Coal Column Activated Carbon,Commercial Activated Carbon
SHIZUISHAN ZhongShi activated carbon co,.ltd , https://www.zscarbonchina.com