[Alcoa.com] The rapid accumulation of aluminum in the alkaline solution will not only shorten the service life of the alkaline solution, but also have an adverse effect on the alkali corrosion rate and the quality of the alkaline parts. It will also increase environmental pollution and material consumption.
In order to reduce the rapid accumulation of aluminum in the alkaline solution, we must first pay attention to the following aspects:
(1) Carefully and carefully pre-treat alkaline parts. If the surface of the pre-alkali corrosion product is heavily oiled or has other contaminants that cannot be removed by the alkaline solution, the alkali etching time must be prolonged, and the aluminum in the alkaline solution will inevitably increase.
(2) Strictly control the process conditions. High concentration, high temperature, and long-term etching in the alkaline etching solution will inevitably accelerate the corrosion of aluminum, which may cause excessive corrosion and accelerate the accumulation of aluminum.
(3) A variety of auxiliary materials, such as sodium carbonate, sodium phosphate, sodium silicate, sodium metasilicate, and emulsifier, are added to the alkali etching solution based on sodium hydroxide. The addition of these materials can enhance the emulsification, saponification of the alkaline solution, and the ability to remove oil on the surface of the part, as well as increase corrosion inhibition and improve wetting and dispersion. It can be seen from these materials that these materials can both reduce the amount of alkaline corrosion and completely eliminate oil pollution. Therefore, it is not simply considered that alkaline etching is the etching of the aluminum oxide layer with sodium hydroxide. Some units even have only sodium hydroxide as a material in the alkaline solution. This is obviously not correct. According to this process, more aluminum will be eroded and it will be difficult to remove all the oil.
Tempered or toughened glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. Tempering puts the outer surfaces into compression and the interior into tension. Such stresses cause the glass, when broken, to crumble into small granular chunks instead of splintering into jagged shards as plate glass (a.k.a. annealed glass) does. The granular chunks are less likely to cause injury. Toughened glass is a kind of safety glass.
Toughened glass can be made on customer's request, clear toughened glass, ultra clear toughened glass, colored tinted toughened glass, printed toughened glass, back painted toughened glass, frosted toughened glass, toughened Laminated Glass, toughened Insulated Glass, toughened Vacuum Insulated Glass and so on.
Toughened glass can be used for furniture, buildings, doors, windows, walls, table tops, fence, partitions, railings, balcony, balustrade, shower room and so on.
toughened glass, clear toughened glass, color tinted toughened glass, ultra clear toughened glass, back painted toughened glass, silk printed toughened glass
Shanghai Lead Glass Co.,Ltd , https://www.leadglazing.com