In many families, people often overlook the problem of the size of the bathroom sink , which makes it too inconvenient to use the bathroom washbasin. If it is too low, it will splash and it will make people stand back and back. Usually, the distance between the lower cabinet of the bathroom washbasin and the floor is about 60 cm.
If the bathroom area is small, it is recommended to choose a freestanding washbasin. The height of the pool surface or countertop should be between 80 and 85 cm, and the depth of the washbasin is proportional to the strength of the faucet water installed on it. The material is made of countertops because it is easy to clean.
When we install the bathroom washbasin, the essentials for its installation must also be mastered. The wash basin products should be flat and cracked. The drain plug should have an overflow hole of not less than 8 mm in diameter.
When the drain plug and the wash basin are connected, the overflow plug of the drain plug should be aligned with the overflow hole of the wash basin to ensure the smooth flow of the overflow. After the insert, the upper end of the drain plug should be lower than the bottom of the wash basin.
The bracket fixing bolts may be galvanized bolts of not less than 6 mm or galvanized metal shrink bolts. If the wall is a perforated brick, shrink bolts are strictly prohibited.
After the wash basin is connected with the drain pipe, it should be firm and compact, and easy to disassemble. The joint should not be open. Silicone paste caulking is applied to the wash basin and the wall contact.
Â
Let's take a look at some good washbasin renovations:
After reading so many beautiful washbasins, did you think about how to decorate your own washbasin?
Want to know more about the renovation, please continue to pay attention to the decoration home.
More related wonderful reading:
What are the wash basin decoration techniques? Washbasin decoration precautions
Washbasin purchase tips wash basin purchase attention
Recessed LED Downlight with built-in Microwave Motion Sensor
| Model | AM-6.0GY |
| Luminous flux | 800~900lm |
| Luminous Efficacy | >80lm/W |
| Colour Rendering index | 80 |
| Beam Angle | 140° |
| Light Decay | <30% over 10,000 hours |
| Rated Lifespan | >30,000 hours |
| Power consumption | 10 watts |
| Input voltage / Frequency | 80-260vac 50-60HZ |
| Reflector / Diffuser | Frosted diffuser |
| Operating Environment | -20°c~+50°c |
| Dimensions | Φ193*77mm |
| Hole Cut Size | Φ160~Φ180mm |
| LED Source | 56pcs SMD2835 |
| Working mode | ON/OFF or Full/Dim |
| Sensor Range | 180*360 degree |
| Sensor Distance | 6-8m Radius |
| Delay Time |
18-25s |
Solar Power,Solar Portable Power Station,Solar Power Panels,Solar Portable Power Station Camping
JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.jmsensorsled.com