Polymer waterproof coating , also known as JS composite waterproof coating ("JS" is the "phonetic prefix" of "polymer cement"), is a polyacrylate emulsion, ethylene-vinyl acetate copolymer emulsion and other polymer emulsions and various A two-component, water-based architectural waterproofing coating consisting of an organic liquid material composed of additives, inorganic powder composed of inorganic fillers such as cement, quartz sand, light heavy calcium carbonate, and various additives through rational rationing and compounding. The use of different parts into the type I, II and III three models.
Product Features:
1. The polymer cement waterproof coating is a water-based coating, non-toxic and harmless, and no pollution is an environmentally friendly coating.
2, the coating has a high tensile strength, water resistance, weather resistance is good.
3, can be constructed on the wet grass and firmly bonded.
4, cold construction, easy operation, grass-roots moisture content is not limited, can shorten the construction period.
Application range:
1. The polymer cement waterproof coating is most suitable for waterproof, impervious and moisture-proof projects in non-exposed roofs, toilets and bathrooms, and external walls.
2, can also be used for underground engineering and tunnels, cave libraries and other coating waterproof.
3, road and bridge, pool, water conservancy project coating waterproof project.
Construction method:
1. Grass-roots level - deal with the grass-roots surface smooth, solid, no sharp corners, floating dust and clear water, and do a waterproof node treatment according to design requirements. The oil is clean, and the low-cut area is flattened.
2. Ingredients - According to the proportion of the liquid material, powder and water marked on the product package. The amount of water added can be properly adjusted to adjust the viscosity of the coating to meet the construction requirements of different parts of the facade and plane.
3, polymer cement waterproof coating with the method is to first liquid material and water into the mixing bucket, in the hand mixer continuously stirring the powder slowly added to it, stirring for at least 5 minutes, thoroughly mixed, was pulpy Blocks.
4ã€Additional waterproof layer - fill the sealing material in the reserved groove according to the design requirements. In the yin and yang angle, pipe root and other details should be painted multiple times (2-4 times) brush JSA-101, underground engineering should be a layer of sandwich Carcass reinforcements.
5, large-surface waterproof layer construction - waterproof coating should be coated multiple times, it is appropriate to complete at least four times, each coating time is generally interval 8h, the winter should be extended. The thickness of each coating film should be 0.4-0.5mm, and the amount of coating should be about 0.8kg/m2. It is not suitable to over-thickness once. The construction of the facade is not suitable for adding water or water, so as to avoid the paint flowing, and the thickness of the facade is not easy to reach the designed thickness. At the same time, it caused the yin and yang corners to be too thick and cracks. When carcass reinforcements are added, the carcass should be laid flat and free of wrinkles. Lapping is not less than 100mm. The paint is applied at the time of construction, and the paint is applied again after being laid.
6. After the coating waterproof layer has passed the experience and is qualified, the protective layer shall be constructed according to the design requirements.
Precautions:
1. The temperature of the polymer cement waterproof coating must be higher than 5°C during construction, and should not be constructed when rainy weather or plain water is available at the grassroots level.
2, waterproof coating film should be completely dry before the surface decoration construction, complete drying time is about 2 days, the humid environment should be appropriately extended.
3. The yin and yang corners of the toilet and bathing façade are not made into arc-shaped parts. I-type polymer cement waterproof coating should be used in areas with low temperature and dry air.
Storage method:
Polymer cement waterproof coatings must be stored in a cool, dry place away from high temperature pyrotechnics.
Information on polymer waterproof coatings was introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Decoration waterproof
High-tech features: The floor mounted Smart Toilet is equipped with a wide range of advanced features that enhance the overall user experience, including self-cleaning function, automatic flushing, seat heating, adjustable water temperature and pressure, bidet function, night light and more.
Easy to install: Designed for easy installation, the floor-mounted smart toilet fits in most bathrooms without additional plumbing or structural modifications. This makes them an easy choice for new construction and bathroom renovations.
Easy to clean: The floor smart toilets often feature self-cleaning features and stain-resistant ceramic coatings. The self-cleaning feature uses water and detergent to keep the toilet clean and hygienic, reducing the need for manual cleaning. Plus, the stain-resistant ceramic coating helps prevent dirt and stain buildup, making it easier to keep your toilet clean.
In summary, the floor standing intelligent toilet provides a luxurious and convenient bathroom experience. With advanced features, easy installation, low maintenance requirements and improved hygiene, it is the ideal addition to modern bathrooms where functionality and comfort are sought.
Floor Smart Toilet, Smart Water Closet, Smart Bidet Toilet, Auto Flushing Toilet
Guangdong Fabia Intelligent Technology Co., Ltd , https://www.smartfabiatoilet.com