In addition to the friends who make renovations, everyone may not understand the installation of solid wood bathroom cabinets. O Kaisha bathroom tells you some small common sense to install solid wood bathroom cabinets. In addition to the friends who make decoration, everyone may not understand the installation of solid wood bathroom cabinets. . Here, Ou Kaisha bathroom popularizes some common sense of installing solid wood bathroom cabinets. When installing a solid wood bathroom cabinet, it is best to reserve a socket near the solid wood bathroom counter basin. Because even if the design is in place again, it will inevitably be overlooked, so it is necessary to remind the installation of the socket near the solid wood bathroom counter basin, so that the charging problem of the small household appliances such as the hair dryer and the electric water heater can be solved. In addition, it is best to pre-empt the opening of the solid wood bathroom cabinet basin when purchasing, if possible, avoid re-opening at the construction site. Because the opening of the basin under the solid wood bathroom counter is better than the scene at the factory, and the on-site grinding takes a long time, the effect is not necessarily good. If you really want to open the hole, be sure to pay attention to the pre-opening position to ensure accuracy.
Most people think that the solid wood bathroom counter basin is more delicate, better looking and more convenient to clean than the above counter basin. However, the faucet with the basin under the solid wood bathroom counter must pay attention, because considering the thickness of the basin edge, the faucet mouth should be as long as possible to ensure normal use. At the same time, when installing the bathroom basin, pay attention to the height should be moderate, should meet the family's height requirements and usage habits.
Finally, pay attention to the position of the drain pipe when installing the solid wood bathroom cabinet. If the position is not right, there will be many other pipes at that time, which is time consuming and expensive, and difficult to see. Therefore, when purchasing these sanitary products, if you are not very good at it, it is best to ask first. Some hardware accessories that look very beautiful may not be installed in your home. Be sure to know the business in advance.
Originally from Ou Kaisha bathroom, please indicate
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
A ballcock (also balltap or float valve) is a mechanism or machine for filling water tanks, such as those found in flush toilets, while avoiding overflow and (in the event of low water pressure) backflow. The modern ballcock was invented by José Antonio de Alzate y RamÃrez, a Mexican priest and scientist, who described the device in 1790 in the Gaceta de Literatura Méxicana.[1] It consists of a valve connected to a hollow sealed float by means of a lever, mounted near the top of the tank. The float is often ball-shaped, hence the name ballcock. The valve is connected to the incoming water supply, and is opened and closed by the lever which has the float mounted on the end. When the water level rises, the float rises with it; once it rises to a pre-set level, the mechanism forces the lever to close the valve and shut off the water flow. This is an example of negative feedback and of proportional control.
Ball Cock, Brass Ball Bibcock, Ballcock Valve, Toilet Ballcock Valve
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.cn-kingsir.com