The wooden door is made of two pieces of high-density fiber molded door panels with styling and simulated wood grain. Since the door panel is hollow, the natural sound insulation effect is worse than that of the solid wood door, and it is not wet and bumpy.
A door made of molded door panels is a molded door. It uses wood of artificial forest, after peeling, slicing, screening, grinding into dry fiber, mixing phenolic glue as binder and paraffin, and molding at high temperature and high pressure. The molded door panel has a concave-convex pattern and is actually a high-density fiberboard with a concave-convex pattern. Therefore, the molded door also belongs to the plywood door, except that the panel of the door is a high-density fiber molded door panel.
1.cylindrical milling cutter
Used for processing flat surfaces on horizontal milling machines. Cutter teeth are distributed on the circumference of the milling cutter, and are divided into straight teeth and spiral teeth according to tooth shape. According to the number of teeth and coarse teeth and two kinds of fine teeth. The helical tooth rough tooth milling cutter has fewer teeth, high tooth strength and large chip space, which is suitable for rough machining. Fine-tooth milling cutters are suitable for finishing.
2. face milling cutter
Also known as disc milling cutter, used for vertical milling machine, end milling machine or gantry milling machine processing plane, end face and circumference have cutter teeth, also have coarse teeth and fine teeth. The structure has three kinds: integral type, insert type and transferable type.
3. End milling cutter
Used for processing grooves and step surface, knife teeth in the circumference and end face, can not work along the axial feed. When the end mill has end teeth through the center, axial feed can be provided.
4. Three-side edge milling cutter
Used for processing all kinds of grooves and steps, its two sides and circumference are provided with cutter teeth.
5. Angle milling cutter
For milling grooves at a certain Angle, there are two kinds of single Angle and double Angle milling cutters.
6.Saw Blade milling cutter
Used for machining deep grooves and cutting off workpieces, there are more cutter teeth on the circumference. In order to reduce the friction during milling, there are 15 '~1° auxiliary Angle on both sides of the cutter teeth. In addition, there are keyway milling cutters, dovetail slot milling cutters, T - shaped slot milling cutters and various forms of milling cutters.
End Mill,Roughing End Mill,Carbide Square Drill Bit,Coating Machine Tools
Behappy Crafts (suzhou)Co.,Ltd , https://www.craftsbehappy.com