SLA vertical open double suction centrifugal pump (SLA vertical open pump) Overview: SLA vertical open pump vertical, single-stage, double-suction shell vertical open double suction centrifugal pump to adapt to In the factories, cities, mines, power plants, farmland water conservancy projects in areas such as water pump. The pump for the delivery of solid particles of water or physical and chemical similar to water and other liquids, medium temperature is 0 ~ 80 ℃, allowing the maximum inlet pressure of 0.6MPa. SLA vertical single-stage double-suction centrifugal pump (SLA vertical open pump) parameters: Flow Q 200 ~ 3770m3 / h Head H 13.5 ~ 142m SLA vertical single-stage double-suction centrifugal pump SLA vertical open pump) Model Description: 10SLA-9 10 - Inlet diameter was 25 (that is, the import diameter of 250mm) SLA - Vertical single-stage double suction axial open center direct centrifugal pump 9- - the ratio of the number of revolutions divided by 10 divisible SLA vertical single-stage double-suction centrifugal pump in the open (SLA vertical open pump) Structure type: vertical pump installation, suction and discharge are at the level direction. The pump body and the pump cover are separated vertically on the shaft centerline. Without disassembling the water inlet and outlet pipelines and motor, the pump cover can be removed and the rotor components can be taken out. Pump bearings on the use of rolling bearings, grease lubrication, the bearing body with a cooling chamber. The lower bearing of the pump is a guide bearing, which is lubricated and cooled by the pump itself. Shaft seal with soft packing and mechanical seal in two forms. Direction of rotation: From the end of the motor to the pump, the pump rotates counterclockwise, that is, the right side of the removable pump cover facing the pump is the water inlet and the left is the water outlet. The main parts material: SLA type vertical open pump flow components are made of cast iron, guide bearing tin bronze, shaft 45 steel.