ã€China Aluminum Industry Network】1. Mark inspection: Whether aluminum profiles and packaging are marked with product standard codes and production license numbers.
2. Surface quality: In addition to the cleanliness of the surface of the aluminum profile, there must be no defects such as cracks, peeling, corrosion, and bubbles, and there must be no defects such as corrosion spots, electric burns, dark spots, and oxide film fall-off.
3, oxide film thickness: aluminum oxide film is formed in the anodizing, with protection and decorative effects, eddy current thickness gauge can be detected.
4, sealing quality: aluminum anodized surface after leaving many gaps, if not closed or closed well, will reduce the corrosion resistance of aluminum. Seal hole quality inspection commonly used methods are acid leaching, conductivity Nafion and Phosphoric Acid Method. Acid leaching is commonly used for on-site inspections. The surfaces of aluminum profiles are scrubbed with acetone to remove oil and dust. Nitric acid with a volume ratio of 50% is dripped onto the surface and gently scrubbed. After 1 minute Wash the nitric acid with water, then wipe it dry. Drop a drop of medical purple drug onto the surface. After 1 minute, wipe off the gentian violet and thoroughly clean the surface. Observe the traces left. The aluminum profiles with bad sealing will leave obvious traces. The more severe the trace, the poorer the sealing quality.
5. Corrosion resistance: This index mainly affects the life span of aluminum profiles. Corrosion resistance tests include copper accelerating acetate spray test and dripping alkali test. Here we introduce the dripping test. That is, at 35°C±1°C, it will be approximately 10mg, 100g/L NaOH solution was dropped on the surface of the aluminum profile, and the droplets were visually observed until a corrosive bubbling occurred, and the oxide film was penetrated. This test was easy to judge in the outdoor summer, to ensure the test Accuracy must be performed under the strict conditions of the laboratory.
The exit signs category features lighted LED exit signs to comply with building fire codes and insurance standards. These energy-saving, illuminated, long-life LED exit signs to use less than 5 watts of power, lowering your energy consumption and saving you money every month. An exit sign is a device in a public facility (such as a building, aircraft, or boat) denoting the location of the closest emergency exit in case of fire or another emergency. Most relevant codes (fire, building, health, or safety) require exit signs to be permanently lit.
We offer a wide range of designs and features for LED exit signs including glass exit sign, aluminum and acrylic exit sign, ABS and acrylic exit sign, and ABS exit sign.
Commercial Exit Sign,Illuminated Exit Signs,Battery Powered Exit Signs,Emergency Exit Lights Led
Jiangmen City Pengjiang District Qihui Lighting Electrical Appliances Co., Ltd , https://www.qihuilights.com