How much external force helmet can withstand? How important is the seemingly insignificant helmet for motorcyclists and motorcycle drivers? Yesterday morning, the police of the Wujiang Taoyuan Traffic Police Squadron demonstrated the entire process of the helmet being completely dismantled by external forces when it entered the village to promote traffic safety regulations.
The disassembled helmet is a basic product sold on the market. A young policeman first struck the helmet at the top with an iron hammer. There was no other damage on the surface of the helmet except for a one dollar coin. Later, a physically stronger policeman continued to beat the damaged site with the same iron hammer. After six consecutive blows, a half-fingered crack appeared in the depression. According to the police, the external impact force caused by the iron hammer hitting is equivalent to the impact force caused by accidental head landing on the ground. In traffic accidents, the perpetrators died of about 95% of the head injuries. Previously, the squadron had dealt with many accidents involving electric vehicles. The victims suffered from injuries caused by external forces, resulting in serious injuries or death because they did not wear a helmet. A helmet can withstand such a strong external force and the villagers find it incredible.
Sukey, the squadron leader of the Taoyuan Traffic Police Squadron, told reporters that there are many roads in the Taoyuan area of ​​Wujiang, where lighting equipment is not fully prepared, and some residents have poor traffic safety awareness. When riding an electric vehicle, they often neglect to observe or completely ignore traffic. Laws and regulations are free to travel, and there are more trucks and buses passing through the area. Once an accident occurs, the consequences are very serious. According to statistics, one of the daily traffic accidents in the Taoyuan area is non-motorized, accounting for more than 60% of the total, and an average of 5 to 10 non-motorized accidents occur each week. In accidents and deaths, the majority of non-local household registrations account for over 70% of the victims. The local traffic police had conducted investigations on this group of people. Some people did not even recognize the signal lights.
Copyright Notice: This article is reproduced from online media and represents only the author's opinion. It has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.
The three-point wood drill is a variant of the twist drill, because the conventional twist drill is easy to deviate when drilling on a flat processing surface. When drilling metal, a pilot hole is usually drilled to locate the Drill Bit. But when doing woodworking, we can have a more convenient choice. The straight tip of the three-point woodworking drill is nailed into the wood like an awl to ensure that the drill will not slip.
Wood Working Bits are cutting tools used to remove material to create different kinds of holes in wood materials. In order to create holes drill bits are usually attached to a drill, which powers them to cut through the objects.
Wood working drill Machining accuracy is good, and drilling out of the hole cleanliness is good, small burr,
Wood Working Dril,Wood Drill,Cutting Tool,Metal Cutting
Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com