Multi-stage pump series

DL, DLR-type pump Vertical single suction multi-stage segmented centrifugal pump for the delivery of water containing no solid particles and the physical and chemical properties similar to the liquid water used mainly for high building water supply can also be used in factories and mines to Drainage, liquid flow rate of 4.9 ~ 200m3 / h, head range of 22 ~ 239m, supporting the power range of 1.5 ~ 160KW, diameter range of Φ40 ~ Φ150mm. Model significance: 80 ------ Nominal diameter of suction pump (mm) DL ------ Vertical multistage centrifugal pump DLR ------ Vertical multi-stage hot water Centrifugal pump 4 ------ Pump series Applications: DL, DLR series pump for industrial and urban water supply and drainage, high-rise building pressurized water supply, fire pressurization, long-distance water supply, heating, bathroom, boiler warm and cold water circulation Booster, air-conditioning and cooling system water supply and equipment and other occasions. DL type medium temperature does not exceed 80 ℃, DLR-type medium temperature does not exceed 120 ℃. Parts Material: The DL pump is composed of a motor and a pump. The motor is a Y-type three-phase induction motor. The pump and the motor are connected by a coupling. The whole is a rigid connection, and no correction is needed. The pump consists of a stator part and a rotor part. Pump stator part by the water section, the middle section, guide vane, water section, stuffing box and other parts. In order to prevent the fixed wear, the stator is equipped with a seal ring, a balance sleeve and the like. The worn part can be replaced by a spare part. The rotor part is borne by the shaft, the middle wheel and the balance drum, and the remaining small part residual axial force is supported by the angular contact ball bearings. The water inlet section, the middle section and the water outlet section are sealed by tightening with paper pads. Seal with packing or mechanical seal, the user can choose according to need. Pump rotation direction from the drive side down to counterclockwise rotation.

Capacitive Fuel Level Sensor

The principle of capacitive type sensor is to use positive and negative probes filled with liquid medium to form a linear change with the liquid level, the change of capacitance (that is, the change of liquid level) into a standard electrical signal output. The core components of the product use highly integrated special capacitance measurement chip, through accurate temperature compensation and linear correction, with high precision, high stability and continuous measurement advantages, with a strong independence. We provide customers several capacitive oil level sensors to meet your needs. You can choose one product according your medium, range, output signal and etc. We also provide OEM services, you can get your suitable products if you have special requirements of the products.

Capacitive Fuel Level Sensor,Capacitive Oil Level Sensor,Capacitive Fuel Sensor,Capacitive Type Sensor

Xi'an Gavin Electronic Technology Co., Ltd , https://www.gamicos-meas.com