In the home improvement process, the renovation of the bathroom is very important. Good bathroom renovation can make our home a better grade. However, if the construction of the workers is not in place, after the floor tiles of the bathroom are used for a long time, there will be gaps. I believe everyone has a headache for how to deal with bathroom floor tiles . In fact, there are many ways to solve the gap in the bathroom floor tiles. If you are interested in it, you may wish to follow me to learn about it!
How to deal with bathroom floor tiles
1. Surface treatment: The caulking process should be carried out 24 hours after the tiles are applied. Tile gaps should be cleaned before the use of tile grout, including dust, grease, and other contaminants. At the same time, the floor tile adhesive between the floor tiles should be removed.
2. Stirring: Use a low-speed drill for mechanical stirring. According to the ratio of 4:1 of powdered water, add clear water into the tile sealant and mix it into a paste. After standing for 10 minutes, stir it again to use.
3. Construction: Use rubber caulking knife or spatula to fill the tiles in the tile gap, and fill the gaps in tile diagonally or in a circular manner. Excess tile residue on the tile, and before the material is solidified, clean the surface of the tiles regularly with a damp sponge or a damp cloth, remove the flaws as soon as possible, and repair them as soon as possible.
4. Cleaning: Use a wrung sponge to clean the tiles, wipe them partially with a clean, damp cloth, and before drying the caulking agent film. After using the tool, wash it with clean water immediately. After initial curing of the gap sealant, wipe off the caulking agent on the surface with a dry cloth, or use water for final cleaning.
Black tiles to solve the black solution
First, the US grout replaces the gap filler in the original gap
First of all, remove the gap sealant and use the tool to shovel the black sealant away. Otherwise, it will be difficult to carry out follow-up work. Be careful when removing it, do not damage the corners of the tiles, and pay attention to safety.
After removing the blackened caulking agent, we need to clean it. We must ensure that every gap is clean, otherwise it will affect the late-stage sticking effect.
When the gap is half dry, you can fill the gap with the US sizing agent. Remember to fill it up and wait 24 hours before walking around the gap.
Why do you need to use beautiful grout? Of course, it is related to its good anti-seepage, strong adhesion and other properties, can make the tile gap to achieve a good waterproof effect.
Second, try to ensure that the ground is dry
In addition to fundamentally solving the problem, we must pay attention to ventilation in peacetime maintenance. When the local surface is wet, we must dry it in time. Because the wet environment can breed bacteria, in addition to adverse effects on the human body, it will also affect the color change of the tile gap. A long time will produce dark spots. So everyone is a little harder when they are at home.
Third, choose the right detergent
There are many cleaning agents available for tile cleaning, such as: clean, soap, etc. These cleaners are divided into acids and alkalis, and different stains require different cleaning agents. For example, acidic cleaners can remove cement traces, stubborn stains, scales, etc. on the tile surface. Alkaline cleaners remove oil and wax layers from the tile surface. If you don't care about these, using them indiscriminately will not only fail to achieve the purpose of cleaning, but will also cause damage to the tiles.
Editor's summary: The above is the relevant content of how to deal with bathroom floor tiles and joints . For indoor beauty and the health of the family, it is recommended that everyone pay attention to clean the dirt on the tiles. If you are about to renovate, it is recommended that you fill in the gap with the US quilt before the renovation stay to avoid a series of troubles in the future.
How to deal with brick seams
Ceramic Sanitary Ware toliet with siphonic type one-piece toliet and automatic sensor toliet. High quality ceramic materials make sure the best quality.Standard export carton also can packed with wooden frame, which make sure No damage during the transportation.
- Contemporary one piece design includes our revolutionary everclean surface,so it's easier to clean and stays cleaner,longer.
- Siphon-flushing: Super quiet and powerful flush with no clogs.
- Chair Height, dual flush and water efficient.
One-Piece Toliet,Bathroom Ceramic Toliet,One Piece Toliet Seats,Round One Piece Toliet,Bathroom urinals
Foshan Castel IMP&EXP Co.,Ltd , https://www.fscastel.com