From the perspective of the entire decoration project, the attention of the hydropower sector is quite high. It can be regarded as the first critical link, and it is a hidden project. Therefore, we must pay special attention! Many people will ask about the norms or standards for hydropower reform. In fact, currently there is no uniform standard for hydropower in the decoration industry. Part of it is the standard of building hydropower. Part of it is the experience of first-line construction workers. However, it must be based on safety, standardization, aesthetics, and practical principles. Here we take a look at home improvement and hydropower to pay attention to what it is!
Home improvement hydropower reform process
Waterway
1, water pipe preparation and slotting
First of all, we should have a reasonable plan in advance so that we can follow it. Slotting is the first step, according to the size of the line, the slot line must not be bent, must go in two directions, one is parallel to the wall, one is perpendicular to the ground, which is what we often say horizontal and vertical standards. The distance between the parallel height and the ground is 60-90cm, and the place with the faucet must be vertical. In addition, the depth of the groove is generally 4cm. After opening, it is necessary for a person to measure and confirm the position.
2. Installation of plumbing pipes
Then to the installation step, you need to first determine the quality of the material, such as the type of pipe, according to the actual needs and preferences to be determined, construction should also be in accordance with the construction plan and the owner to discuss a good location and use the function and scope, also To fix all taps and water positions, pipe the pipes according to their position.
3, water pipeline inspection
Then it is to check the work just completed. Although it is a preliminary inspection, if it finds water seepage, it can be reworked in time by pressure test, seal all the mouths, and then press the test water with a pressure gauge to see all the interfaces of the pipeline. There is no leakage phenomenon. Another method can be used, that is, after the water pipe is closed, open the sluice for two days to see if there is water seepage at the joint.
Circuit
1. Slotting of wire lines
Similarly, there is still a reasonable plan to negotiate in advance, and according to the above drawings to layout, if not there is only on-site consultation with the owners. The first is the line work, or the standard for the slotted vertical slot, no bending phenomenon, and then put all the switch socket bottom box, the distance from the ground requires 40 cm, and the hanging type socket is 2.2 The meter position, of course, is 1.2-1.4 meters from the floor.
2, wire circuit wiring
After understanding the basic requirements, we must come to start the wiring. At this time, we must first consider the strong and weak power, switches, air-conditioning sockets and electrical outlets need to be separated to avoid the use of large amounts of electricity and burned. In general, strong and weak power requirements are placed at the bottom, with a spacing of about 30 centimeters from the ground; while air-conditioned lines are routed more than 2 meters above the ground; appliances are routed on the ground; switches and lighting equipment can be routed away from the wall. After all the wires have gone well, the person in charge needs to remember the layout of the circuit and the size of the discharge. This will make it much easier to place the furniture, and the post-repair is also very convenient.
Summary: The above is Xiaobian made for everyone today, home improvement and hydropower related knowledge, I believe that my friends have a certain understanding, we can refer to the home improvement hydropower reform, I hope this article is helpful to you.
Entry Doors,Modern Front Door,Double Front Doors,Exterior Sliding Doors
Foshan QI'AN Fireproof Shutter Doors Co., Ltd , https://www.fsqianfiredoor.com