In modern life, toilets become indispensable sanitary wares for every household. When decorating, there will be many requirements for the selection and purchase of toilets, and the same applies to installation. As a user, the installation of toilets may be unclear. , but everyone must know how to test its installation. We all know that after the toilet is installed, what kind of standard is it? Now, we go along with the Xiaobian to see what is the installation and acceptance criteria for toilets?
Toilet seat installation acceptance criteria
Appearance: In the process of toilet installation, if the installation master is not serious or inexperienced, it can easily cause damage to the surface of the toilet. First check the glazed surface for scratches, and tap the edge with a thin stick to hear the sound crisp, if "scratching" sounds prove cracked.
Try to stabilize: The stability of the toilet is very important. When installing, it depends on whether the grass-root shop is stable and whether the traditional bolts are evenly placed. Then sit on it and feel firm.
Look at the details: It is indispensable to do silicone treatment on the toilet bowl, depending on whether it is evenly applied. Check whether the fittings in the water tank are well filled and filled with water to see if the float floats properly. Try to check whether the toilet board is installed firmly by hand. Whether the handle or key can be normally returned and no noise during trial punch.
Listen to the sound: try flushing several times in succession to check whether the toilet sewer drains are unblocked. You can use cigarette butts to test its momentum, once washed away to prove normal in all aspects. If the sound of flushing is too loud or noise is generated, it may be that debris is not discharged and it is easy to block during installation.
Check leakage point: When using the visual inspection and feel method acceptance, should carry out no less than 2 hours water test. See if the position of the water seal is normal and whether there is leakage of water in the tank. Touch the outside of the toilet and the water inlet and outlet pipes by hand to check if there is any leakage, and no leakage can pass through.
About the fine installation of the toilet installation related content, Xiao Bian introduced here, and everyone on how to accept the installed toilet knows? Toilets as an essential tool for life must be carefully checked to ensure that the installation quality is acceptable. Otherwise, if problems occur, everyone can think of how inconvenient it is! If you have any other questions, please feel free to ask questions. For more information, please follow this site!
Ware purchase decoration materials knowledge bathroom decoration toilet
LED GU10 Spot Light,LED dimmable spotlight,Led Spotlight,Standard LED spots GU10
Foshan Extrlux Co., Ltd. , https://www.extrlux.com