Dump Truck Hyva Single Acting Hydraulic Oil Cylinder RAM Telescopic

Introduction:
The length of a hydraulic cylinder is the total of the stroke, the thickness of the piston, the thickness of bottom and head and the length of the connections. Often this length does not fit in the machine. In that case the piston rod is also used as a piston barrel and a second piston rod is used. These kinds of cylinders are called telescopic hydraulic cylinder. If we call a normal rod cylinder single stage, In general telescopic cylinders are much more expensive than normal cylinders. Most telescopic cylinders are single acting (push).

Key features:
A. Working pressure: 16-35MPa
B. Stroke: long stroke
C. Lifting force: 127~609KN
D. Seal Type: Parker, NOK, Hallite or as customer's requirement
E. Piston Rod: Chrome or nickel plated, ground & polished piston rod
F. Mounting alternatives include trunnion mount, clevis, pineyes, or lugs with spherical bearings
G. Custom options for ports and integrated valves
H. Diverse preferences for seals due to temperature or heavy duty usage
I. Extensive pressure testing
J. Finished cylinder is sandblasted and painted to customer specifications

Installation method:
The most commonly used mounting options are flange, trunnion, clevis, pin-eye, cross-tube, spherical, and tang. Cylinder mounting is chosen based upon the application's requirements.

Hydraulic cylinder seals:
Low friction, high load piston seals with outboard wear bands are standard. Loaded lip seals and cast iron rings are optional.

Hydraulic cylinder rod:
High strength damage resistant piston rod provides 100,000 PSI minimum yield material in 1" through 4 1/2" diameters. Larger diameters vary between 50,000 and 75,000 PSI minimum yield material. All rods are case hardened to 50-55 RC and hard chrome plated to provide maximum wear life. Stainless steel is also available. The hard chrome plated of the piston rod according to your requirement.

Speification:

 

 

Quality control:
1. Seiko secret agents, to ensure quality of the piston rod.
2. The product have to go through heat treatment - bore boring - grinding - car processing - black nitriding and many other processes.
3. The company accepted the Valet processing various types and various sizes products, processing and processing more quotes, welcome to consult.

After-sales service:
1. We offer 12 months warranty.
2. Various operation instructions such as: products inspect and control ,Receiving inspection control ,sampling inspection operation instruction, process quality inspection operation instruction etc
3. Pre-sale service and free consultation service.
4. Quality control service includes pre-acceptance, departure inspection, arrival inspection, PDI delivery inspection.
5. Guarantee period is subjected to warranty instruction (1 year/ 2000 hours whichever comes first).
6. Free after-sale service during the warranty refers to problems caused by quality issues; any non quality problem occurred, we will charge the maintenance fee according to relevant standard.
7. Service Center all over the world for after sales problems.

How to choose:
1. Choice will depend on the operating conditions of the unit. It is necessary to determine the precise physical characteristics and geometry of the installation.
2. The bore, or cylinder diameter will determine the amount of force the piston can apply. Rod characteristics, usually standardized, fastening system, damping and stroke are other important factors.
3. Stroke, in particular, is an essential specification, since it defines the distance the piston travels between its initial and its final position.
4. Additional criteria include the use of presence sensors to indicate the position of the piston, the seals, purge and drain valves, type and temperature of the hydraulic fluid.

 

 

 

 

Introduction:
The length of a hydraulic cylinder is the total of the stroke, the thickness of the piston, the thickness of bottom and head and the length of the connections. Often this length does not fit in the machine. In that case the piston rod is also used as a piston barrel and a second piston rod is used. These kinds of cylinders are called telescopic hydraulic cylinder. If we call a normal rod cylinder single stage, In general telescopic cylinders are much more expensive than normal cylinders. Most telescopic cylinders are single acting (push).

Key features:
A. Working pressure: 16-35MPa
B. Stroke: long stroke
C. Lifting force: 127~609KN
D. Seal Type: Parker, NOK, Hallite or as customer's requirement
E. Piston Rod: Chrome or nickel plated, ground & polished piston rod
F. Mounting alternatives include trunnion mount, clevis, pineyes, or lugs with spherical bearings
G. Custom options for ports and integrated valves
H. Diverse preferences for seals due to temperature or heavy duty usage
I. Extensive pressure testing
J. Finished cylinder is sandblasted and painted to customer specifications

Installation method:
The most commonly used mounting options are flange, trunnion, clevis, pin-eye, cross-tube, spherical, and tang. Cylinder mounting is chosen based upon the application's requirements.

Hydraulic cylinder seals:
Low friction, high load piston seals with outboard wear bands are standard. Loaded lip seals and cast iron rings are optional.

Hydraulic cylinder rod:
High strength damage resistant piston rod provides 100,000 PSI minimum yield material in 1" through 4 1/2" diameters. Larger diameters vary between 50,000 and 75,000 PSI minimum yield material. All rods are case hardened to 50-55 RC and hard chrome plated to provide maximum wear life. Stainless steel is also available. The hard chrome plated of the piston rod according to your requirement.

Speification:

 

 

Quality control:
1. Seiko secret agents, to ensure quality of the piston rod.
2. The product have to go through heat treatment - bore boring - grinding - car processing - black nitriding and many other processes.
3. The company accepted the Valet processing various types and various sizes products, processing and processing more quotes, welcome to consult.

After-sales service:
1. We offer 12 months warranty.
2. Various operation instructions such as: products inspect and control ,Receiving inspection control ,sampling inspection operation instruction, process quality inspection operation instruction etc
3. Pre-sale service and free consultation service.
4. Quality control service includes pre-acceptance, departure inspection, arrival inspection, PDI delivery inspection.
5. Guarantee period is subjected to warranty instruction (1 year/ 2000 hours whichever comes first).
6. Free after-sale service during the warranty refers to problems caused by quality issues; any non quality problem occurred, we will charge the maintenance fee according to relevant standard.
7. Service Center all over the world for after sales problems.

How to choose:
1. Choice will depend on the operating conditions of the unit. It is necessary to determine the precise physical characteristics and geometry of the installation.
2. The bore, or cylinder diameter will determine the amount of force the piston can apply. Rod characteristics, usually standardized, fastening system, damping and stroke are other important factors.
3. Stroke, in particular, is an essential specification, since it defines the distance the piston travels between its initial and its final position.
4. Additional criteria include the use of presence sensors to indicate the position of the piston, the seals, purge and drain valves, type and temperature of the hydraulic fluid.

 

 

 

 

Electric Jigsaw

The 650W 800W Jig Saw is used for Cutting Wood, Plastic Tube, Aluminum Bar, with 6 speed, 4 Pendulum Settings, Bevel Cutting 45°,Laser Function.

No burrs with good blade.

Jigsaw is the wood working power tools, Perfect for cutting curve, hole digging,can cut 3cm circle.

Portable Jigsaw With variable speed, 0-3000rpm, for different material cutting.

The Jigsaw with 20mm stoke, T-shank Blade.

The 800W Jigsaw can cutting Capacity: Wood:80mm, steel:10mm

The Jig Saw with 4 Pendulum, 0 setting for metal, 1 setting for wood, 2-3 setting for soft wood.

Jig Saw with Normal clamp chuck,Iron base.

Hand Jig Saw with a counterbalanced low-vibration plunge mechanism

Power Saw With a dust blower for max cut -line visibility.

Wood Cutting Power Tools with protection button for your safety, soft rubber handle for comfortable use.

The Jig Saw is equipped with Guide ruler, to control the cutting width.

Built-in Laser Function, for better cutting line ability.

CE/GS/EMC/ROHS certificate.

Electric Jig Saw Jigsaw,Electric Jigsaw,Power Jigsaws,Electric Jig Saws,Cordless Electric Jig Saw

Ningbo Brace Power Tools Co., Ltd , https://www.cnbrace.com