Custom-Made Tungsten Nickel Copper W93nicu Alloy Tube From America

• High density (up to 65% denser than Lead). 
• Denser materials exist (, pure Tungsten, Gold, platinum group metals) but their use is restricted by availability, workability and cost. 
• Providing mass where volume space is limited. 
• Concentrated weight essential where accuracy is required in placement of mass. 
• Placement of weight in situations where airflow has a significant impact. 

• Possible, either to press components to shape, or to cut and shape material prior to sintering. 
• Reducing the amount of final machining necessary to produce the finished component. 
• Can be machined conventionally and without much difficulty. 

• Blending of tungsten powder with other metal powders and a bonding agent, cooling and sieving. 
• Pressing the blended powder to the required shape (allowing for shrinkage during the final processing), and shaping the green part component. 
• Pre-sintering the pressed components to remove the bonding agent. 
• Final sintering in the hydrogen fed furnace to fuse the powder particles together. 
• Supplied in bar, square, round and rectangle sizes are available in rough oversize, or turned or ground to exact requirements. Components can also be produced to customer drawings. 

Thermal Properties 

• High softening temperature. 
• Low thermal conductivity and low coefficient of expansion gives the material a high resistance to thermal fatigue. 
• Excellent soldering erosion resistance to molten aluminium. 
• Strong at high temperatures with high thermal stability. 

high grade Tungsten high heavy alloy AMST 21014 class 3(another expression)   
        - Material: W90-97NiFe(Magnetic) & W90-97NiCu(Nonmagnetic)
        - Density:16.8-18.8g/cm3
        - Rods Size:dia(1.5 -200) x Length<500mm  
         Plate size: 0.1min Thickness*W*L

Property of tungsten alloy

AMST 21014 class 1
90%WNiFe, 90%WNiCu
Density : 17.0
Hardness: 32HRC max
Elongation: 5-20%

AMST 21014 class 2
92.5%WNiFe, 92.5%WNiCu
Density : 17.2
Hardness: 33HRC max
Elongation: 5-15%

AMST 21014 class 3
95%WNiFe, W95NiCu
Density : 18.0
Hardness: 34HRC max
Elongation: 3-10%

AMST 21014 class 4
97.5%WNiFe, W97.5NiCu
Density : 18.85
Hardness: 35HRC max
Elongation: 1-8%

Mechanical Properties 

• High Young's modulus of elasticity. Does not creep when experiencing significant forces, unlike Lead. 
• Despite their strength, they remain ductile and resistant to cracking. 
• The hardness range of the alloys is typically 20-35 Hardness HRC. 

Tungsten Alloys   Â
EFI Grade	EF17	EF175	EF18	EF185
ASTM B 777-07	1	2	3	4
Weight %  Tungsten	90	92.5	95	97
Nominal Density GM/CC	17.00	17.50	18.00	18.50
Minimum* Ultimate Tensile Strength UTS (KSI)	110	110	105	100
Minimum* Elongation %	5	5	3	2
Modulus of Elasticity (KSI)	45,000	48,000	50,000	52,000

Tungsten high heavy aloy applications:
      - Balancing weights
 
      - Electroheat upsetting anvil block
      - Balls in bomb
      - High voltage electrical contact

Our Standard and safe Packing
     -  paper wrapped the sheets, then plastic paper protected from moisture
     -  Foam board around the the inner wooden case
     -  Standard exported plywood case outside
 
Delivery time: 10-35days as your required qty.

Our relevant tungsten high heavy alloy products and packing photoes,hope you are interested in them


 

Optical Cuvettes

Yixing Jinke Optical Instrument Co., Ltd. is a high-tech manufacturer committed to research, development and manufacturing of high-quality spectral consumables. With 50 years of experience in research, development and manufacturing, our products include: glass, Quartz Cuvettes, flow cell, Lens, reflector, filter, etc.

We have been continuously improving the company's R&D and preparation capabilities, optimizing the management system, and helping customers to continuously improve their product competitiveness. Our strategic partners cover chemical, pharmaceutical, biological, medical in vitro diagnosis, aerospace, communications, food, materials, environment, agriculture, inspection and quarantine and other fields.

As a spectrum accessories manufacturer with strong technical capabilities in China, Jingke Optics will try its best to provide more high-quality and convenient products and services for the majority of scientific researchers and instrument manufacturers, and work with you to create a better future!

Optical Cuvettes,Lovibond Glass Cuvettes,Lovibond Quartz Cuvettes,Optical Glass Cuvette

Yixing Jingke Optical Instruments Co.,Ltd. , https://www.jkgxcn.com