Chinese cabbage fertilization method

Cabbage leaves as a product and is most sensitive to nitrogen requirements. However, when the amount of nitrogen is too high and the phosphorus and potassium are insufficient, the cabbage plants are long, the leaves are large and thin, the ball is not tight, and the water content is large and the quality is degraded.

According to the test, for every 100 kilograms of cabbage produced, about 150 grams of nitrogen, 70 grams of phosphorus pentoxide, and 200 grams of potassium oxide. In the case of 5,000 kilograms of vegetable produced per mu, about 7.5 kilograms of nitrogen, 3.5 kilograms of phosphorus pentoxide, and potassium oxide. 10 kg. The approximate ratio of them is nitrogen: phosphorus pentoxide: potassium oxide = 1:0.47:1.33, and the most absorbed potassium oxide is observed, followed by nitrogen and phosphorus pentoxide.

The absorption of the three elements in each growth period is also different, from the germination period to the rosette period, only about 10% of the total absorption, while the absorption during the ball-forming period is 90%, and the proportion of the three elements absorbed in each period is also different. Nitrogen is most absorbed from the germination stage to the rosette stage, followed by potassium oxide and phosphorus. The potassium oxide absorbed during the ball-forming period was the most, followed by nitrogen, and phosphorus pentoxide was still the least.

Specific fertilization methods:

1. Applying organic fertilizer Generally, the organic fertilizer is applied in the range of 3,000 kg to 5,000 kg, and the old vegetable is strong and the application is less, and the new vegetable is weak.

2. Skillfully applying seedling fertilizer The growth of the plant during this period is still not large, only 0.41% of the whole period, and the growth rate is still very fast, increasing by 2.39 times per day. In order to ensure that the seedlings get enough nutrients, it is necessary to apply the quick-acting fertilizer “lifting seedling fertilizer”, and the fertilizer for the seedling fertilizer is 5 kg to 6 kg per mu. When applying fertilizer, the seedlings and weak seedlings should be biased to promote the formation of strong seedlings.

3. Reasonable topdressing It is necessary to grasp the seedlings of the seedlings and start to enter the rosette period and start the top dressing twice before the start of the package. It is the key to ensure the high yield of Chinese cabbage. This section of Chinese cabbage is in the rapid growth period, should increase the amount of topdressing, mainly nitrogen fertilizer, nitrogen fertilizer and phosphorus and potassium fertilizer, and the spraying of 1% potassium dihydrogen phosphate solution twice or three times on the leaf surface can increase the vegetable yield.

4. Re-application of potassium fertilizer Re-application of potassium fertilizer can enhance the disease resistance and storability of Chinese cabbage. Generally, potassium fertilizer such as 15 kg of potassium chloride or 20 kg of potassium sulfate can be applied, and ash can also be applied.

In addition, the application of a small amount of calcium and boron fertilizer will also make the cabbage good and improve the quality.
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

Push Button Hand Shower

The utility model discloses a Kitchen Shower head that is convenient to switch the water outlet mode, has a compact structure, and is easy to use, and a kitchen faucet using the kitchen shower head. , The shower head is provided with a water separator, and the water separator is provided with an annular flow channel and an inner flow channel respectively connected to the spray water outlet body and the V-shaped water outlet body, and the lower end of the outer wall of the water separator is upwardly circular A plurality of water inlet holes connected to the annular flow channel are provided, and a first sealing ring is provided on the lower side of the water inlet hole; the water outlet end of the shower body is connected with a converter, and the converter is provided with a communicating In the water diversion cavity at the water outlet end of the shower body, the lower end of the water diversion device is installed in the water diversion cavity and can move up and down, and the upper end of the inner wall of the water diversion cavity is provided with a convex ring matching the first sealing ring, so The bottom surface of the water diversion cavity is provided with a sealing gasket that can seal the inner flow channel.

Waterfall Shower Head,Overhead Shower Head,Push Button Hand Shower,Brushed Nickel Sink Faucet

Yuyao Zelin Sanitary Ware Co., Ltd , https://www.kitchen-sinkfaucets.com