In the product installation, the bathroom hardware is installed, don't underestimate the hardware, it is still awkward to install. Hardware ware generally has the following types:
1. Basin: It can be divided into hanging type, column type and table top.
2, toilet: can be divided into two types of flushing and siphoning.
3, bathtub: one of the equipment for high-end bathroom.
4, shower room: composed of door panels and floor basins.
5, bidet: women's professional, currently domestic use less.
6, urinal: for men.
7, hardware accessories: the form of the pattern is different.
Hardware ware installation order
Inlay wall tiles - suspended ceiling - laying floor tiles - installation of toilets, washbasins, tubs - installation of connection drains - installation of lamps, sockets, mirrors - installation of towel rods and other hardware accessories.
1, the installation order of the toilet
Check the floor drain pipe - align the nozzle - level the alignment - draw the mark - punch the hole - put on the putty - put on the rubber pad - screw the nut - the two sides of the water tank on the back of the hole mark - punch - insert Bolt - æ» - - Back tank hoist flat - Screw on the nut - Install the back tank water elbow - Install the splayed door - Insert the float door and the splayed door - Tighten the nut.
2, the installation order of the washbasin
Expansion bolts are inserted - æ» - the tube rack is hung - put the washbasin on the rack to find the level - the water connection: the washbasin - straighten - the water connection.
3, the installation of the tub
Sequential water installation - putty closed tightly - water installation - flattening.
Hardware ware installation skills
1, the installation of the handle:
Handle installation is ergonomic and easy to use. All handles for the same wardrobe must be neat and tidy during installation. The length of all screws should match the thickness of the cabinet door and the drawer surface. When drilling with a drill, the hole size should be the same as the diameter of the screw.
2. Installation of the door hinge:
Generally, two 100mm hinges are installed in the door. If it is a solid door or a concave and convex door, three hinges must be used, or two hinges with a length of 125mm should be installed.
3. Installation of the lock:
After the door lock is installed, its handle should be between 900-1000mm. Install the lock body and the lock tongue first, so that the lock tongue plate is flush with the door edge, close the door, fix the position of the lock plate, and then install the lock plate, and ensure that the lock plate is flush with the edge of the door cover.
Editor in charge: Lu Liping
701 Biological Microscope,Microscope For Biology Students,Microscope For Soil Biology,Biology Lab Microscope
Ningbo Beilun Kalinu Optoelectronic Technology Co.,Ltd , https://www.kalinueot.com